...
首页> 外文期刊>Metrology and Measurement Systems: Metrologia i Systemy Pomiarowe >LASER REFLECTANCE INTERFEROMETRY SYSTEM WITH A 405 NM LASER DIODE FOR IN SITU MEASUREMENTS OF CVD DIAMOND THICKNESS
【24h】

LASER REFLECTANCE INTERFEROMETRY SYSTEM WITH A 405 NM LASER DIODE FOR IN SITU MEASUREMENTS OF CVD DIAMOND THICKNESS

机译:带有405 NM激光二极管的激光反射干涉测量系统,用于CVD金刚石厚度的原位测量

获取原文
获取原文并翻译 | 示例

摘要

In situ monitoring of the thickness of thin diamond films during technological processes is important because it allows better control of deposition time and deeper understanding of deposition kinetics. One of the widely used techniques is laser reflectance interferometry (LRI) which enables non-contact measurement during CVD deposition. The authors have built a novel LRI system with a 405 nm laser diode which achieves better resolution compared to the systems based on He-Ne lasers, as reported so far. The system was used for in situ monitoring of thin, microcrystalline diamond films deposited on silicon substrate in PA-CVD processes. The thickness of each film was measured by stylus profilometry and spectral reflectance analysis as a reference. The system setup and interferometric signal processing are also presented for evaluating the system parameters, i.e. measurement uncertainty, resolution and the range of measurable film thickness.
机译:在工艺过程中对金刚石薄膜的厚度进行原位监控非常重要,因为它可以更好地控制沉积时间并更深入地了解沉积动力学。广泛使用的技术之一是激光反射干涉仪(LRI),它可以在CVD沉积过程中进行非接触式测量。作者已经建立了一个新颖的LRI系统,该系统具有405 nm激光二极管,与迄今为止基于He-Ne激光器的系统相比,它具有更好的分辨率。该系统用于在PA-CVD工艺中对沉积在硅基板上的微晶金刚石薄膜进行原位监测。通过触针轮廓仪和光谱反射率分析作为参考来测量每个膜的厚度。还介绍了系统设置和干涉信号处理,以评估系统参数,即测量不确定度,分辨率和可测量膜厚的范围。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号