...
首页> 外文期刊>Medical Physics >Evaluation of the geometric accuracy of surrogate-based gated VMAT using intrafraction kilovoltage x-ray images
【24h】

Evaluation of the geometric accuracy of surrogate-based gated VMAT using intrafraction kilovoltage x-ray images

机译:使用分数内千伏x射线图像评估基于替代物的门控VMAT的几何精度

获取原文
获取原文并翻译 | 示例

摘要

Purpose: To evaluate the geometric accuracy of beam targeting in external surrogate-based gated volumetric modulated arc therapy (VMAT) using kilovoltage (kV) x-ray images acquired during dose delivery. Methods: Gated VMAT treatments were delivered using a Varian TrueBeam STx Linac for both physical phantoms and patients. Multiple gold fiducial markers were implanted near the target. The reference position was created for each implanted marker, representing its correct position at the gating threshold. The gating signal was generated from the RPM system. During the treatment, kV images were acquired immediately before MV beam-on at every breathing cycle, using the on-board imaging system. All implanted markers were detected and their 3D positions were estimated using in-house developed software. The positioning error of a marker is defined as the distance of the marker from its reference position for each frame of the images. The overall error of the system is defined as the average over all markers. For the phantom study, both sinusoidal motion (1D and 3D) and real human respiratory motion was simulated for the target and surrogate. In the baseline case, the two motions were synchronized for the first treatment fraction. To assess the effects of surrogate-target correlation on the geometric accuracy, a phase shift of 5 and 10 between the two motions was introduced. For the patient study, intrafraction kV images of five stereotactic body radiotherapy (SBRT) patients were acquired for one or two fractions. Results: For the phantom study, a high geometric accuracy was achieved in the baseline case (average error: 0.8 mm in the superior-inferior or SI direction). However, the treatment delivery is prone to geometric errors if changes in the target-surrogate relation occur during the treatment: the average error was increased to 2.3 and 4.7 mm for the phase shift of 5 and 10, respectively. Results obtained with real human respiratory curves show a similar trend. For a target with 3D motion, the technique is able to detect geometric errors in the left-right (LR) and anterior-posterior (AP) directions. For the patient study, the average intrafraction positioning errors are 0.8, 0.9, and 1.4 mm and 95th percentile errors are 1.7, 2.1, and 2.7 mm in the LR, AP, and SI directions, respectively. Conclusions: The correlation between external surrogate and internal target motion is crucial to ensure the geometric accuracy of surrogate-based gating. Real-time guidance based on kV x-ray images overcomes the potential issues in surrogate-based gating and can achieve accurate beam targeting in gated VMAT.
机译:目的:使用在剂量输送过程中获得的千伏(kV)X射线图像,评估基于外部替代物的门控体积调制电弧疗法(VMAT)中的束靶向的几何精度。方法:使用Varian TrueBeam STx Linac对物理体模和患者进行门控VMAT治疗。在目标附近植入了多个金基准标记。为每个植入的标记创建参考位置,代表其在门控阈值处的正确位置。门控信号是从RPM系统生成的。在治疗过程中,使用车载成像系统,在每个呼吸周期中,在进行MV束照射之前立即获得kV图像。检测所有植入的标记,并使用内部开发的软件估算其3D位置。标记的定位误差定义为图像每一帧标记与参考位置的距离。系统的总体误差定义为所有标记的平均值。对于幻象研究,模拟了目标和替代物的正弦运动(1D和3D)和真实的人类呼吸运动。在基线情况下,两个运动在第一个治疗阶段同步。为了评估替代目标相关性对几何精度的影响,引入了两个运动之间5和10的相移。对于患者研究,获取了五名立体定向身体放疗(SBRT)患者的分数内kV图像的一两个分数。结果:对于幻像研究,在基线情况下实现了较高的几何精度(平均误差:上下或SI方向为0.8 mm)。但是,如果在治疗过程中发生目标-替代关系的变化,则治疗过程容易产生几何误差:相移5和10时,平均误差分别增加到2.3和4.7 mm。用真实的人类呼吸曲线获得的结果显示出类似的趋势。对于具有3D运动的目标,该技术能够检测左右(LR)和前后(AP)方向的几何误差。对于患者研究,在LR,AP和SI方向上,平均分数内定位误差分别为0.8、0.9和1.4 mm,第95个百分位误差分别为1.7、2.1和2.7 mm。结论:外部替代物与内部目标运动之间的相关性对于确保基于替代物的门控的几何精度至关重要。基于kV X射线图像的实时指导克服了基于替代物的门控中的潜在问题,并可以在门控VMAT中实现精确的光束瞄准。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号