Development of process for aluminising nickel alloy 718 strips for tube bundle support structures in liquid sodium-water steam generators

摘要

The tubes in liquid sodium-water steam generators of the Indian prototype fast breeder reactor (PFBR) will be supported by corrugated nickel alloy 718 strips. Aluminisation of nickel alloy 718 strips has been chosen for this application because of the excellent performance of aluminide coatings in reducing impact fretting wear of the tubes due to flow induced vibrations and compatibility of the coating with liquid sodium at the operating temperature of the steam generators. Aluminisation of nickel alloy 718 strips for steam generator tube bundle support structures has been developed using a procedure involving thermal spraying of aluminium followed by diffusion heat treatment in vacuum atmosphere. One of the advantages of the technique is that it will coat only the desired surfaces of the strips, whereas in conventional pack cementation process, significant precautions have to be ensured. Furthermore, this process has enabled aluminisation to be carried out at a much lower cost than the conventional process of pack aluminising. The problems encountered during the initial trials and technology development, such as coating thickness and distortion, are discussed. A process flow chart for this procedure to take the job on an industrial scale is also reported. This process (under patenting) has been adopted for the aluminisation of corrugated strips for the support structures of one steam generator module and the steam generator for a test facility during the technology development phase, as also of all the steam generators being fabricated for the PFBR.