...
首页> 外文期刊>Marine Geology >Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin
【24h】

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

机译:坎塔布连大陆边缘的形态沉积特征和最新沉积构造模型

获取原文
获取原文并翻译 | 示例

摘要

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180-245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700-4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water - MW) that interact with the Le Danois Bank, favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops. The recent architecture depositional model is .complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).
机译:多波束测深,高(套筒式气枪)和超高分辨率(参数系统-TOPAS-)地震记录用于定义形态沉积特征并研究坎塔布连大陆边缘的沉积构造。外层架(低至180-245 m的水深)显示出强烈侵蚀的海底表面,可截断固结的古老折叠和破碎的沉积物。最近的沉积物仅在当地以低水准的陆缘沉积物和带有床形的透明悬垂物存在。大陆坡受沉积过程的影响,这些沉积过程共同构成了当今所见的形态沉积特征。上(低至2000 m的水深)和下(低至3700-4600 m的水深)边坡大多遭受不同类型的边坡破坏,例如滑坡,大量沉积物(坍落度和质量流量的混合) )和浑浊电流。上坡还受到与Le Danois河岸相互作用的底流(地中海水-MW)的作用,有利于沉积物的修复和轮廓线系统的雕刻。大陆上升是泥石流和浊流的旁路区域,在那里形成了盖雪貂风扇的复杂的波瓣过渡区(CLTZ)。最近的建筑沉积模型非常复杂,其原因是剩余的结构模板以及相互连接的沉积系统和过程的巨大变异性。由于在相对陡峭的整个沉积剖面上大量的沉积物被抽空,因此该边缘被认为是饥饿的。沉积物主要从坎塔布连山脉和比利牛斯山脉(源头)侵蚀,并由小溪/河流山脉运到海中。它绕过大陆架,当沉积物到达斜坡时,它通过主要的海底排水系统(大的海底山谷和大规模移动过程)被输送到大陆上升段和比斯开深海平原(下沉区)。控制这种结构的因素是构造和沉积物的来源/扩散,它们是密切相关的,而海平面的变化和海洋学的作用则很小(从长远来看)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号