首页> 外文期刊>Macromolecules >Growth of multilayer films of fixed and variable charge density polyelectrolytes: Effect of mutual charge and secondary interactions
【24h】

Growth of multilayer films of fixed and variable charge density polyelectrolytes: Effect of mutual charge and secondary interactions

机译:固定和可变电荷密度聚电解质多层膜的生长:互电荷和二次相互作用的影响

获取原文
获取原文并翻译 | 示例
           

摘要

We report on the effect of mutual polyelectrolyte charge and secondary interactions on the formation of polyelectrolyte multilayer films of a lowly charged copolymer of acrylamide and [3-(2-methylpropionamido)propyl]trimethylammonium chloride, AM-MAPTAC 10 (10 mol % of cationic monomers), and poly(acrylic acid) (PAA). These multilayer films were constructed on planar substrates by the sequential adsorption of AM-MAPTAC 10 and PAA at different pH conditions. Surface plasmon resonance spectroscopy (SPRS), quartz crystal microbalance (QCM), and atomic force microscopy (AFM) were employed to follow the film formation process. While AM-MAPTAC 10 is permanently charged, the ionization of PAA is adjusted by changing the pH of the adsorption solutions. In contrast with previous studies, it is shown that multilayer formation with one polyelectrolyte with a charge density of 10 mol % is possible. However, the multilayer growth follows a different pattern depending on the relative charge density of PAA. At low pH, where PAA is only lowly ionized, the films show an exponential-like growth, with a gradual increase of the thickness and adsorbed mass per layer with increasing layer number. At neutral to alkaline pH, where PAA approaches full ionization, multilayer growth proceeds via a series of adsorption-desorption steps, with immersion in PAA solutions leading to partial removal of the underlying AM-MAPTAC 10 layer. The obtained results are discussed in terms of an interplay between electrostatic and secondary interactions within the films and matching of the charge density of the polyelectrolytes employed to construct the films. [References: 44]
机译:我们报告相互的聚电解质电荷和次级相互作用对形成低电荷的丙烯酰胺和[3-(2-甲基丙酰胺基)丙基]三甲基氯化铵共聚物AM-MAPTAC 10(阳离子的10摩尔%)的聚电解质多层膜的形成的影响单体)和聚丙烯酸(PAA)。通过在不同pH条件下依次吸附AM-MAPTAC 10和PAA,将这些多层膜构建在平面基材上。表面等离子体共振光谱(SPRS),石英晶体微量天平(QCM)和原子力显微镜(AFM)用于跟踪膜形成过程。当AM-MAPTAC 10永久充电时,可通过改变吸附溶液的pH值来调节PAA的电离。与先前的研究相反,表明可以用一种聚电解质以10摩尔%的电荷密度形成多层。然而,取决于PAA的相对电荷密度,多层生长遵循不同的模式。在低pH值下,PAA仅被低电离,该膜显示出指数状增长,随着层数的增加,层的厚度和吸附质量逐渐增加。在PAA接近完全电离的中性至碱性pH值下,多层生长通过一系列吸附-解吸步骤进行,并浸入PAA溶液中,导致部分去除了下面的AM-MAPTAC 10层。根据膜内的静电相互作用和次级相互作用之间的相互作用以及用于构造膜的聚电解质的电荷密度的匹配来讨论所获得的结果。 [参考:44]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号