Pyrolytic oil production by catalytic pyrolysis of refuse-derived fuels: Investigation of low cost catalysts

摘要

Low cost catalytic pyrolysis options were studied by using spent and regenerated ZSM-5, RDF char and oyster shell in the pyrolysis of RDF. The pyrolysis was performed at a temperature of 500 degrees C, sweeping gas flow rate of 20 ml/min and heating rate of 10 degrees C/min. The catalysts were effective in reducing tar yield and oxygen content and increasing the organic fraction. ZSM-5 lost some activity after one use but regeneration helped to increase its effectiveness. The catalytic bio-oil had density, heating value and viscosity comparable to the conventional diesel fuel. Gases from catalytic pyrolysis have significant heating values ranging from 17.1 to 21.9 MJ/m(3) but the use of the catalyst led to an increasing production of CO2. Catalyst use did not alter significantly the characteristics of the solid residue. (C) 2015 Elsevier B.V. All rights reserved.