Laminated crossarms made from decommissioned chromated copper arsenate-treated utility pole wood. Part II: Preservative retention, glue-line shear, and delamination.

摘要

Laminated utility pole crossarms constitute one of the potential industrial products that can be produced from decommissioned wood utility poles. A previous report evaluated the mechanical properties of laminated utility pole crossarms made from decommissioned chromated copper arsenate (CCA)-treated southern pine (Pinus spp.) utility pole wood, untreated virgin wood, and a mixture of virgin wood and decommissioned utility pole wood. In particular, the bending strength, stiffness, and acoustic properties were assessed after pentachlorophenol (penta) retreatment. This study evaluated CCA and penta retention, glue-line shear, and glue-line delamination of the laminated crossarms. The results of this study show that, after penta retreatment, penta retention increased in correlation to the presence of increasing numbers of treated wood plies in the beams. All the laminated crossarms met the minimum shear strength requirement of 8.60 MPa, which is specified in American Society for Testing and Materials (ASTM) Standard D2559. Most of the laminated crossarms (22 of 24) showed a delamination average of less than 5 percent. However, none of the beams met the individual glue-line delamination requirement (1%) of ASTM Standard D2559. More glue-line delamination was found between two utility pole wood plies and between a utility pole wood ply and a virgin wood ply than between two virgin wood plies. Delamination could be a concern for utility pole wood laminated crossarms to be used in an adverse environment. A better gluing system is needed to improve the delamination performance of utility pole wood laminated beams for exterior applications.