Laser-Induced Flexible Electronics (LIFE) for Resistive, Capacitive and Electrochemical Sensing Applications

摘要

Engineering a cost-effective, flexible electronic device in a one-step fabrication process is quite challenging to perform. Herein, we have introduced a simple, low-cost, solidstate process for producing and printing of complex circuits using Laser-InducedGraphene (LIG). In the present work, LIG has been effectively and selectively formed from direct CO2 laser ablation on a polyimide sheet. Varying CO2 laser power and speed, the electrical conductivity of the LIG has shown a linear increment in the conductivitymeasurement. The laserinduced samples were structurally characterized using Scanning Electron Microscopy (SEM), EDX, X-ray Photoelectron Spectroscopy (XPS), Raman spectroscopy. The results show a one-step method to create Graphene-derived structures on the polyimide sheet surface. This method of generating LIG on a flexible substrate (polyimide sheet) offers an easy way to fabricate Laser-Induced Flexible electronics (LIFE) circuits. Using this, the feasibility and the realization of a capacitive touch sensor and liquid level sensor has been successfully demonstrated. Further, as a prototype system, the LIG was examined for the H2O2 electrochemical sensing application. It gives an appreciable response for the detection of H2O2 in comparison to other carbon-based electrodes with limit-of-detection (LOD) as 0.3 mu M in a linear range from 1 mu M to 10 mu M.