首页> 外文期刊>Experimental Thermal and Fluid Science: International Journal of Experimental Heat Transfer, Thermodynamics, and Fluid Mechanics >Visualization study of gas-liquid two-phase flow patterns inside a three-stage rotodynamic multiphase pump
【24h】

Visualization study of gas-liquid two-phase flow patterns inside a three-stage rotodynamic multiphase pump

机译:三级旋转动力多相泵内气液两相流型态的可视化研究

获取原文
获取原文并翻译 | 示例
       

摘要

Visualization experiments were conducted to investigate (under different operating conditions) the gas-liquid two-phase flow patterns at the entry section and the impellers inside a three-stage rotodynamic multiphase pump designed by the authors. A mixture of water and air was selected as the medium. The high-speed photography technology was used to investigate the flow field. The flow pattern presented at the entry section was observed to be bubbly flow. The average diameter of the bubbles increased with the increasing inlet gas volume fraction (IGVF) but decreased with the increasing rotational speed. The flow patterns in the impellers could be classified into four categories with the increasing IGVF. For the tiny IGVF, isolated bubbles flow emerged in all the three impellers. For small values of the IGVF, no obvious gas pocket was observed and the bubbly flow was the main flow pattern in three stages. As the IGVF increased, the gas pocket first appeared in the first stage, while the bubbly flow pattern remained as the main flow pattern in the second and third stages. With further increasing IGVF, the three stages all exhibited as gas pocket flow. The gas pocket originally formed at the suction surface of the blades and then moved to the pressure surface as the gas pocket flowed downstream with the fluid. In addition, some bubbles moved upstream leave the diffuser entrance along the axial direction. Segregated gas flow was observed as the final catagory with the increasing IGVF. The flow pattern maps of the gas-liquid two-phase flow were drawn under different conditions, the ranges of flow patterns extended in the direction of high IGVF with the increasing rotational speed and shrank in the direction of low IGVF with the increasing liquid volume flow rate. With continued increases in the IGVF, the differential pressure of the pump decreased sharply in the range of the gas pocket flow and then decreased smoothly in the range of segregated gas flow. (C) 2015 Elsevier Inc. All rights reserved.
机译:进行了可视化实验,以研究(在不同的操作条件下)作者设计的三级旋转动力多相泵的入口段的气液两相流模式和叶轮。选择水和空气的混合物作为介质。高速摄影技术用于研究流场。观察到在入口部分出现的流型为气泡流。气泡的平均直径随进气体积分数(IGVF)的增加而增加,但随转速的增加而减小。随着IGVF的增加,叶轮中的流型可分为四类。对于微小的IGVF,在所有三个叶轮中都出现了孤立的气泡流。对于较小的IGVF,没有观察到明显的气穴,气泡流是三个阶段的主要流动模式。随着IGVF的增加,气穴首先出现在第一阶段,而气泡流型在第二和第三阶段仍是主流。随着IGVF的进一步提高,这三个阶段均表现为气袋流量。气穴最初形成在叶片的吸力表面,然后随着气穴随流体流向下游而移至压力面。另外,一些向上游移动的气泡沿轴向离开扩散器入口。随着IGVF的增加,隔离气流被视为最终的分类。在不同条件下绘制了气液两相流的流型图,随着转速的增加,流型范围向高IGVF方向扩展,向低IGVF方向收缩。率。随着IGVF的持续增加,泵的压差在气穴流量范围内急剧下降,然后在偏析气流范围内平稳下降。 (C)2015 Elsevier Inc.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号