Implementation of multi-objective Jaya optimization for performance improvement in machining curve hole in P20 mold steel by sinking EDM

摘要

PurposeMachining of curved channels using electrical discharge machining (EDM) is a novel approach. In this study, an experimental setup was designed, developed and mounted on die-sinking EDM to manufacture curve channels in AISI P20 mold steel.Design/methodology/approachThe effect of specific machining parameters such as peak current, pulse on time, duty factor and lift over material removal rate (MRR) and tool wear rate (TWR) were studied. Multi-objective optimization was performed using Taguchi technique and Jaya algorithm.FindingsThe experimental results revealed current and pulse on time to have the predominant effect over material removal and tool wear diagnostic parameters with contributions of 39.67, 32.04 and 43.05, 36.52, respectively. The improvements in material removal and tool wear as per the various optimization techniques were 35.48 and 10.91, respectively.Originality/valueThus, Taguchi method was used for effective optimization of the machining parameters. Further, nature-based Jaya algorithm was implemented for obtaining the optimum values of TWR and MRR.