...
首页> 外文期刊>Biochimica et biophysica acta. Biomembranes >Charge distribution and imperfect amphipathicity affect pore formation by antimicrobial peptides
【24h】

Charge distribution and imperfect amphipathicity affect pore formation by antimicrobial peptides

机译:电荷分布和不完美的两亲性会影响抗菌肽的孔形成

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Antimicrobial peptides often permeabilize biological membranes via a pore mechanism. Two pore types have been proposed: toroidal, where the pore is partly lined by lipid, and barrel-stave, where a cylindrical pore is completely lined by peptides. What drives the preference of antimicrobial peptides for a certain pore type is not yet fully understood. According to neutron scattering and oriented circular dichroism, melittin and MG-H2 induce toroidal pores whereas alamethicin forms barrel-stave pores. In previous work we found that indeed melittin seems to favor toroidal pores whereas alamethicin favors cylindrical pores. Here we designed mutants of these two peptides and the magainin analog MG-H2, aimed to probe how the distribution of charges along the helix and its imperfectly amphipathic structure influence pore formation. Molecular dynamics (MD) simulations of the peptides in a pre-formed cylindrical pore have been performed. The duration of the simulations was 136 ns to 216 ns. We found that a melittin mutant with lysine 7 neutralized favors cylindrical pores whereas a MG-H2 mutant with lysines in the N-terminal half of these peptides neutralized and an alamethicin mutant with a positive charge at the position 7 form semitoroidal pores. These results suggest that charged residues within the N-terminal half are important for toroidal pore formation. Toroidal pores produced by MG-H2 are more disordered than the melittin pores, likely because of the charged residues located in the middle of the MG-H2 helix (K11 and K14). Imperfect amphipathicity of melittin seems to play a role in its preference for toroidal pores since the substitutions of charged residues located within the nonpolar face by hydrophobic residues suppress evolution of a toroidal pore. The mutations change the position of lysine 7 near the N-terminus, relative to the lower leaflet headgroups. The MD simulations also show that the melittin P14A mutant forms a toroidal pore, but its configuration diverges from that of melittin and it is probably metastable.
机译:抗菌肽通常通过孔机制渗透生物膜。已经提出了两种孔类型:环形的,其中的孔部分地被脂质衬里;以及桶形壁,其中的圆柱形的孔被肽完全地衬里。尚未完全了解导致某种孔径类型使用抗菌肽的原因。根据中子散射和定向的圆二色性,蜂毒肽和MG-H2诱导形成环形孔,而乐果霉素形成桶形壁孔。在以前的工作中,我们发现蜂毒肽确实似乎有利于环形孔,而乐果霉素则有利于圆柱形孔。在这里,我们设计了这两种肽的突变体和麦角菌肽类似物MG-H2,旨在探究电荷沿着螺旋的分布及其不完全的两亲结构如何影响孔的形成。已对预先形成的圆柱孔中的肽进行了分子动力学(MD)模拟。模拟的持续时间为136 ns至216 ns。我们发现,中和赖氨酸7的蜂毒肽突变体有利于圆柱孔,而在这些肽的N端一半具有赖氨酸的MG-H2突变体被中和,在7位带正电荷的alamethicin突变体形成半环孔。这些结果表明,N末端一半内的带电残基对于环形孔的形成很重要。 MG-H2产生的环形孔比蜂毒肽孔更无序,这可能是由于位于MG-H2螺旋(K11和K14)中间的带电残基所致。蜂毒蛋白的不完美两亲性似乎在其对环孔的偏爱中起作用,因为疏水性残基取代了位于非极性面内的带电残基,从而抑制了环孔的演化。相对于较低的小叶头基,突变改变了赖氨酸7在N末端附近的位置。 MD模拟还表明,蜂毒肽P14A突变体形成环形孔,但是其构型与蜂毒肽不同,并且可能是亚稳态的。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号