Time-dependent system reliability of anchored rock slopes considering rock bolt corrosion effect

摘要

This paper aims to investigate the effect of rock bolt corrosion on time-dependent system reliability of anchored rock slopes. First a corrosion degradation model for reinforcing steel bars in concrete is selected to model the uniform corrosion of rock bolts. Second, two typical failure modes of rock bolts due to corrosion and the resultant slope failure modes are identified. Subsequently, a Monte Carlo simulation-based reliability approach is proposed to perform system reliability analysis of anchored rock slopes. Finally, an example of an anchored rock slope is worked out to investigate the effect of rock bolt corrosion on the time-dependent reliability of the anchored rock slope. The results indicate that the probability of slope failure upon yield failure of rock bolts at the free length only increases slightly with time. On the contrary, the probability of slope failure upon bond failure at the bolt-grout interface increases dramatically with time. The system probability of failure of the anchored rock slope decreases with increasing thickness of bolt cover and increases with increasing water-cement ratio of the grout. During the design and construction of pre-stressed rock bolts, a certain thickness of bolt cover should be guaranteed and the water-cement ratio of the grout should be strictly controlled to enhance the long-term stabilization effect of rock bolts.