Two-dimensional and three-dimensional finite element analysis of critical crack-tip-opening angle in 2024-T351 aluminum alloy at four thicknesses

摘要

Although the crack-tip-opening angle (CTOA) has been shown to be well suited for modeling stable crack growth and instability for thin-sheet aluminum alloys, its behavior for increasing thickness has not been thoroughly evaluated. This paper presents the results of two-dimensional and three-dimensional finite element based fracture analyses that were performed to characterize the critical CTOA for C(T) specimens made of 2024-T351 aluminum alloy with thicknesses of 2.3, 6.35, 12.7, and 25.4 mm. Computed CTOA, based on a center-node release methodology, was generally higher than experimentally determined surface CTOA measurements for the same thicknesses. For the C(T) specimens analyzed in this work, with the crack length and uncracked ligament generally greater than four times the specimen thickness, the generated global constraint factor data fell within those reported for M(T), DE(T), and SE(B) specimen configurations that also satisfy the above mentioned dimensional guideline. Strengthening the observation that, although critical CTOA is dependent on absolute material thickness, the CTOA characterization process is independent of specimen/loading types and specimen dimensions for cases satisfying this dimensional guideline. The CTOA values generated using 3D finite element analyses were used within a 2D finite element analysis framework to estimate plane strain core (PSC) height values for all evaluated thicknesses. The resulting PSC heights increased with increasing specimen thickness and appear to be on the order of specimen thickness.