Cross-section corrosion-potential profiles of aluminum-alloy brazing sheets observed by the flowing electrolyte scanning-droplet-cell technique

摘要

The scanning-droplet-cell (SDC), recently used for studying electrochemistry of electrodes in micro-areas, was modified to a flowing electrolyte-type one (f-SDC), in which fresh electrolyte was continuously supplied on the surface to be examined. The f-SDC with a coaxial double capillary structure could avoid the contamination of electrolyte by species dissolved from the measuring electrode surface. In the present study, the f-SDC technique was applied successfully to obtain profiles of the corrosion potential for the cross-sections of aluminum-alloy brazing sheets, used for the heat exchanger of the automobile. The brazing sheets consist of an Al-Zn alloy sacrificial anode layer, an Al-Mn-Cu core layer and an Al-Si brazing filler. The profiles of the corrosion potential, important to evaluate the corrosion protection performance of the sacrificial anode, revealed that the potential gradient arising from the sacrificial anode to the core layer is mainly controlled by zinc, which diffuses from the former layer to the latter during the cladding treatment and the post-heat treatment.