...
首页> 外文期刊>Electroanalysis >Determination of trace vanadium by adsorptive stripping voltammetry at a carbon paste electrode
【24h】

Determination of trace vanadium by adsorptive stripping voltammetry at a carbon paste electrode

机译:碳糊电极吸附溶出伏安法测定痕量钒。

获取原文
获取原文并翻译 | 示例

摘要

A method for the voltammetric determination of vanadium using a carbon paste electrode (CPE) was described. The new procedure is based on the adsorptive accumulation of the V(V)-alizarin red S(ARS) complex onto the surface of the CPE, followed by the electrochemical reduction of adsorbed species. The optimal experimental conditions include the use of 0.10 mol/L acetate buffer (pH 5.1), 1.0 x 10(-5) mol/L ARS, an accumulation potential of -0.10 V (versus SCE), an accumulation time of 2 min, a scan rate of 200 mV/s and a second-order derivative linear scan mode. The reduction peak for the complex appears at -0.52 V. The peak current is proportional to the concentration of V(V) over the range of 0.10 - 15.0 mu g/L, and the detection limit is 0.04 mu g/L for a 2 min adsorption time. The relative standard deviations(n = 8) for 2.0 and 0.50 mu g/L V(V) are 3.1 and 4.7%, respectively The proposed method was applied to the determination of vanadium in water samples.
机译:描述了一种使用碳糊电极(CPE)伏安法测定钒的方法。新的程序是基于V(V)-茜素红S(ARS)络合物在CPE表面上的吸附积累,然后通过电化学方式还原吸附的物质。最佳实验条件包括使用0.10 mol / L乙酸盐缓冲液(pH 5.1),1.0 x 10(-5)mol / L ARS,-0.10 V的累积电势(相对于SCE),2分钟的累积时间, 200 mV / s的扫描速率和二阶导数线性扫描模式。络合物的还原峰出现在-0.52V。峰电流与V(V)的浓度成正比,范围为0.10-15.0μg / L,检测限为2时为0.04μg / L。最短吸附时间。 2.0和0.50μg / L V(V)的相对标准偏差(n = 8)分别为3.1和4.7%。该方法用于水样中钒的测定。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号