...
首页> 外文期刊>Earth-Science Reviews: The International Geological Journal Bridging the Gap between Research Articles and Textbooks >Anastomosing rivers: a review of their classification, origin and sedimentary products [Review]
【24h】

Anastomosing rivers: a review of their classification, origin and sedimentary products [Review]

机译:吻合河流:河流的分类,起源和沉积产物综述[综述]

获取原文
获取原文并翻译 | 示例
           

摘要

Anastomosing rivers constitute an important category of multi-channel rivers on alluvial plains. Most often they seem to form under relatively low-energetic conditions near a (local) base level. It appears to be impossible to define anastomosing rivers unambiguously on the basis of channel planform only. Therefore, the following definition, which couples floodplain geomorphology and channel pattern, is proposed in this paper: an anastomosing river is composed of two or more interconnected channels that enclose floodbasins. This definition explicitly excludes the phenomenon of channel splitting by convex-up bar-like forms that characterize braided channels. In present definitions of anastomosing rivers, lateral stability of channels is commonly coupled with their multi-channel character. Here, it is suggested that these two properties be uncoupled. At the scale of channel belts, the terms 'straight', 'meandering' and 'braided' apply, whereas at a larger scale, a river can be called anastomosing if it meets the definition given above. This means that, straight, meandering and braided channels may all be part of an anastomosing river system. Straight channels are defined by a sinuosity index; i.e., the ratio of the distance along the channel and the distance along the channel-belt axis is less than 1.3. They are the type of channel that most commonly occurs in combination with anastomosis. The occurrence of straight channels is favoured by low stream power, basically a product of discharge and gradient, and erosion-resistant banks. Anastomosing rivers are usually formed by avulsions, i.e., now diversions that cause the formation of new channels on the floodplain. As a product of avulsion, anastomosing rivers essentially form in two ways: (1) by formation of bypasses, while bypassed older channel-belt segments remain active for some period; and (2) by splitting of the diverted avulsive flow, leading to contemporaneous scour of multiple channels on the floodplain. Both genetic types of anastomosis may coexist in one river system, but whereas the first may be a long-lived floodplain-wide phenomenon, the latter only represents a stage in the avulsion process on a restricted part of the floodplain. Long-lived anastomosis is caused by frequent avulsions and/or dow abandonment of old channels. Avulsions are primarily driven by aggradation of the channel belt and/or loss of channel capacity by in-channel deposition. Both processes are favoured by a low floodplain gradient. Also of influence are a number of avulsion triggers such as extreme floods, log and ice jams, and in-channel aeolian dunes. Although some of these triggers are associated with a specific climate, the occurrence of anastomosis is not. A rapid rise of base level is conductive to anastomosis, but is not a necessary condition. Anastomosing rivers can be considered an example of equifinality, since anastomosis may result from different combinations of processes or causes. Anastomosing river deposits have an alluvial architecture characterized by a large proportion of overbank deposits, which encase laterally connected channel sand bodies. Laterally extensive, thick lenses of lithologically heterogeneous, fine-grained avulsion deposits can be an important element of the overbank deposits of anastomosing rivers. These deposits may also fully surround anastomosing channel sandstones. Anastomosing channel sand bodies frequently have ribbon-like geometries and may possess poorly developed upward-fining trends, as well as abrupt flat tops. The overbank deposits commonly comprise abundant crevasse splay deposits and thick natural levee deposits. Lacustrine deposits and coal are common in association with anastomosing river deposits. None of these characteristics is unique to anastomosing river deposits, and in most cases, anastomosis (coexistence of channels) cannot be demonstrated in the stratigraphic record. (C) 2001 Elsevier Science B.V. All rights reserved. [References: 182]
机译:冲积河流是冲积平原上多渠道河流的重要类别。通常,它们似乎是在(本地)基本水平附近相对较低的能量条件下形成的。似乎仅根据航道平面图就不可能明确界定河流。因此,本文提出了以下定义,将洪泛区的地貌和河道模式结合在一起:一条吻合河由两个或更多个相互连接的河道组成,这些河道包围了流域。该定义明确排除了由呈辫状通道特征的凸条状形式造成的通道分裂现象。在目前的河道定义中,河道的横向稳定性通常与其多河道特征相结合。在这里,建议将这两个属性解耦。在河道带的规模上,术语“直”,“弯曲”和“编织”适用,而在更大的规模上,如果一条河流满足以上给出的定义,则可以称为吻合。这意味着,直线,蜿蜒和辫状的河道都可能成为河床系统的一部分。直线通道由弯曲指数定义;即,沿着通道的距离与沿着通道带轴线的距离之比小于1.3。它们是最常与吻合结合发生的通道类型。直通道的出现受到低水流功率(基本上是放电和坡度的产物)和耐腐蚀堤的推动。吻合河通常由撕裂形成,即现在分流导致在洪泛区形成新的河道。作为撕脱的产物,吻合河基本上以两种方式形成:(1)通过形成旁路,而旁路的较旧的河道带段仍活跃一段时间。 (2)通过分流的侵蚀性水流,导致洪泛区同时冲刷多条河道。两种遗传类型的吻合可能在一个河流系统中共存,但第一个可能是漫长的洪泛区现象,而后者仅代表了洪泛区受限部分的侵蚀过程的一个阶段。长期吻合是由于频繁撕脱和/或遗弃旧通道引起的。撕脱主要是由通道带的凝结和/或通道内沉积造成的通道容量损失驱动的。低洪泛区梯度有利于这两个过程。影响因素还包括许多破坏触发因素,例如极端洪水,原木和冰堵以及河道内的风沙丘。尽管这些触发因素中的一些与特定的气候有关,但吻合的发生与否无关。基础水平的快速升高有助于吻合,但不是必要条件。吻合河可以看作是等价性的一个例子,因为吻合可能是由于过程或原因的不同组合而引起的。吻合河沉积物具有冲积构造,其特征是大量的堤岸沉积物包围了横向连接的河道砂体。岩性上非均质的细颗粒撕裂沉积物的横向广泛的厚晶状体可能是河床吻合的重要组成部分。这些沉积物也可能完全包围着吻合河道砂岩。吻合河道砂体经常具有带状的几何形状,并可能具有较差的向上精细化趋势,以及陡峭的平顶。堤岸存款通常包括丰富的裂隙八角形存款和厚厚的天然堤防存款。 Lacustrine沉积物和煤与河床沉积物结合在一起很常见。这些特征都不是吻合河沉积物所独有的,并且在大多数情况下,地层记录中无法证明吻合(河道共存)。 (C)2001 Elsevier Science B.V.保留所有权利。 [参考:182]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号