...
首页> 外文期刊>Economic geology and the bulletin of the Society of Economic Geologists >Modeling the Role of Sodic Alteration in the Genesis of Iron Oxide-Copper-Gold Deposits, Eastern Mount Isa Block, Australia
【24h】

Modeling the Role of Sodic Alteration in the Genesis of Iron Oxide-Copper-Gold Deposits, Eastern Mount Isa Block, Australia

机译:在澳大利亚东部伊萨山块氧化铁-铜-金-金矿床成因中苏打蚀作用的建模

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Liberation of iron and potassium by widespread postmetamorphic albitization of country rocks was one of the likely contributing processes in the formation of both barren and mineralized magnetite + - chalcopyrite + biotite + gold + hematite + clinopyroxene + actinolite + apatite ironstones in the Cloncuny district of the Pro-terozoic Mount Isa block. Whole-rock geochemical data indicate nearly immobile Al, Ga, + -Ti, Zr during transformation of a variety of least altered rocks toward albitite. The data indicate that the addition of Na from a brine to the rock accompanied the loss of Fe, K, Ba, Rb + - Ca, Si; Co, V, Mn, Pb, and Zn from those altered rocks and enrichment in the brine, but that Cu was not systematically stripped from a variety of wall rocks during albitization. Conversely, the formation of metasomatic ironstones, the immediate hosts to some Cu-Au ores, involves addition of most of the same elements that were lost during albitization. The correlation between intensity of alteration, its distribution and timing (e.g., in breccias cored by ca. 1530-1500 Ma granitoids), and convergence of all rock types toward magmatic stable isotope values provides strong evidence for a substantial component of igneous-derived fluid. Simulations of the albitization process were carried out isothermally at 550°C and 350 MPa and polythermally from these conditions down to 400 deg C and 200 MPa, using the Gibbs minimization method with HCh software and the UNITHERM database. Both simple fluid-rock mixing models and more complicated reactor-style algorithms used a range of input fluids (from fluids equilibrated fluid with two-feldspar granite through to Na/K ratios consistent with fluid inclusion results) and geochemical data for initially unaltered wall rocks. The apparent paradox of widespread albitization resulting from fluid released by two-feldspar granites can be explained by relatively small shifts away from the K-feldspar-albite equilibrium curve, and even isothermal model fluids derived from two-feldspar granites produce albitites in calc-silicate rocks outboard of granite-proximal K-feldspar-clinopyroxene skarns, matching field patterns. Those models with fluid Na/K ratios similar to those of fluid inclusions produced the most realistic alteration assemblages, dominated by albite, for both isothermal conditions and decreasing temperature, which approximate those observed in the field. PIXE and microthermometric data on fluid inclusions from quartz in two-feldspar quartz monzonite and pegmatite at the top of the Mount Angelay pluton indicate bulk Na/K molar ratios in the fluid of between 10 and 20. considerably higher than our thermodynamically calculated values for fluid in equilibrium with two-feldspar granite of around 3 (at 550 deg C, 350 MPa). Such shifts may have been attained by admixture of magmatic-hydrotliermal fluid with small amounts of NaCl brines trapped along grain boundaries in scapolite-bearing calc-silicate wall rocks, by fluid immiscibility due to high initial CO_2 contents in the felsic intrusions, by contributions from mafic magmas, or from dissolution of salt-rich layers into the intrusions prior to crystallization and fluid release. With increasing amounts of fluid-rock interaction in the models, the fluids were enriched in K, Fe, and Ca, approaching compositions observed in fluid inclusions in the ore deposits. These fluids, reacted with pelitic rocks (which are common ore hosts), would produce magnetite-clinopyrox-ene + - biotite-actinolite alteration at high temperature, similar to the proximal alteration around ore deposits. We infer that precipitation of sulfides in the Cu-Au deposits was the result of mixing of Cu-bearing brine, of ultimately magmatic origin, but modified extensively via albitization, with sulfur-bearing fluids or reaction of the brine with sulfur-bearing rocks, When Cu was absent from the initial magmatic fluid, barren ironstones may have been the result.
机译:广泛的变质后的乡村岩石释放铁和钾是贫瘠和矿化磁铁矿+-黄铜矿+黑云母+金+赤铁矿+斜辉石+阳起石+磷灰石铁矿形成的可能过程之一。伊萨尔元古生代块。全岩石地球化学数据表明,在各种变化最小的岩石向方铁矿转化过程中,Al,Ga,+-Ti,Zr几乎不动。数据表明从盐水中向岩石中添加Na伴随着Fe,K,Ba,Rb +-Ca,Si的流失。岩石中的Co,V,Mn,Pb和Zn发生了变化,并在盐水中富集,但是在阿尔奇化过程中,并未从各种围岩中系统地去除Cu。相反,交代铁矿石的形成是某些铜金矿石的直接寄主,它涉及到在仲裁过程中丢失的大多数相同元素的添加。蚀变强度,其分布和时机(例如,以约1530-1500 Ma花岗岩为中心的角砾岩)与所有岩石类型趋向岩浆稳定同位素值之间的相关性为火成岩流体的主要成分提供了有力的证据。使用具有HCh软件的Gibbs最小化方法和UNITHERM数据库,在550°C和350 MPa等温下以及在低至400℃和200 MPa的这些条件下进行多热等温模拟了仲裁过程。简单的流体-岩石混合模型和更复杂的反应堆式算法都使用了一系列输入流体(从具有两种长石花岗岩的流体平衡流体到与流体包裹体结果一致的Na / K比)和最初未改变的围岩的地球化学数据。由两种长石花岗岩释放的流体引起的广泛的阿尔卡特化的明显悖论可以通过相对于钾长石-阿尔比特平衡曲线的相对较小的偏移来解释,甚至从二长石花岗岩衍生的等温模型流体也可以在钙硅酸盐中生成阿尔比特石。靠近花岗岩的钾长石-斜长石矽卡岩外侧的岩石,匹配场型。对于等温条件和降低的温度,那些流体钠/钾比与流体包裹体相似的模型产生了最现实的蚀变组合,其中钠长石为优势,这与现场观察到的近似。在安吉拉峰岩体顶部的两长石石英蒙脱石和伟晶岩中来自石英的流体包裹体的PIXE和微热计量数据表明,流体中的总Na / K摩尔比在10至20之间。这大大高于我们对流体进行热力学计算得出的值与约3的两长石花岗岩处于平衡状态(在550℃,350 MPa时)。这种变化可能是由于岩浆水热流体与少量的NaCl盐水混合而形成的,这些NaCl盐水沿方晶界夹在含方沸石的钙硅酸盐岩壁中,由于在长英质侵入体中初始CO_2含量较高,因此与流体不混溶。镁铁质岩浆,或在结晶和流体释放之前将富盐层溶解到侵入岩中。随着模型中流体-岩石相互作用量的增加,流体富含K,Fe和Ca,接近在矿床流体包裹体中观察到的成分。这些流体与黄土岩石(常见的矿石宿主)反应,在高温下会产生磁铁矿-斜辉石-烯烃-黑云母-阳起石蚀变,类似于矿床附近的蚀变。我们推断,硫化铜在Cu-Au矿床中的沉淀是最终含岩浆的含铜盐水混合的结果,但通过与硫磺化流体的套利化或盐水与含硫岩石的反应而被广泛改性。当最初的岩浆流体中不含铜​​时,可能是贫瘠的铁矿石。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号