首页> 外文期刊>Earth and Planetary Science Letters: A Letter Journal Devoted to the Development in Time of the Earth and Planetary System >Nature and velocity of pyroclastic density currents inferred from models of entrainment of substrate lithic clasts
【24h】

Nature and velocity of pyroclastic density currents inferred from models of entrainment of substrate lithic clasts

机译:从基质碎屑夹带模型推断的火山碎屑密度电流的性质和速度

获取原文
获取原文并翻译 | 示例
           

摘要

Deposits of pyroclastic density currents (PDCs) often contain accidental lithic clasts of typical size of 0.1-1 m captured from an underlying substrate by the parent flows at distances up to several tens of kilometers from the eruptive vent. In order to gain insights into the nature of PDCs, this study investigates the conditions required for entrainment of particles from a granular substrate by a gas-particle density current, with special emphasis to ignimbrite-forming currents whose dynamics are controversial. The two types of physics of emplacement of PDCs proposed in literature are considered. The first model deals with a hydraulically rough, dilute turbulent PDC of bulk density of similar to 1-10 kg/m(3) and considers that entrainment through both traction and saltation is controlled by a Shield criterion at high (>10(4)) particle Reynolds number. The second model considers entrainment by a PDC consisting of a dense basal flow of bulk density of the order of 10(3) kg/m(3) and with high interstitial gas pore pressure. This model involves uplift of substrate particles, caused by an upward pressure gradient at the flow-substrate interface, and then transport and deposition on the aggrading basal deposit of the flow as demonstrated by recent laboratory experiments. Results show that a dilute PDC can entrain blocks of maximum size of similar to 10-15 cm (for a block density of 2000-3000 kg/m(3)) if maximum current velocities up to similar to 100 m/s are taken into account. This, in turn, suggests that larger (heavier) blocks found in deposits were captured by PDCs if these had a dense basal flow. The dense flow model predicts that PDCs have the potential to entrain metric blocks, whose maximum size (up to similar to 2-5 m) decreases with decreasing atmospheric pressure (i.e. increasing altitude). Application of the model considering published data on the characteristics of accidental blocks in several well-studied ignimbrites indicates that the velocity of the parent dense PDCs was up to similar to 25-30 m/s. (C) 2015 Elsevier B.V. All rights reserved.
机译:火山碎屑密度流(PDCs)的沉积物通常包含母岩流从喷发口最远几十公里处从下层基底捕获的典型大小为0.1-1 m的偶然岩屑。为了深入了解PDC的性质,本研究调查了通过气体颗粒密度电流从颗粒基质中夹带颗粒所需的条件,其中特别强调了动力学上有争议的形成火成石的电流。考虑了文献中提出的两种PDC安置的物理学。第一个模型处理的是堆积密度近似为1-10 kg / m(3)的液压粗糙,稀薄湍流PDC,并认为通过牵引和盐分夹带由高(> 10(4) )雷诺数。第二个模型考虑了PDC的夹带作用,该PDC由体积密度为10(3)kg / m(3)的高密度基流和高间隙气孔压力组成。该模型涉及由流-底物界面处的向上压力梯度引起的底物颗粒的抬升,然后如最近的实验室实验所证明的那样,在流的逐渐沉积的基底沉积物上进行运输和沉积。结果表明,如果考虑到最大电流速度高达100 m / s,则稀释的PDC可以夹带最大尺寸约为10-15 cm的块(块密度为2000-3000 kg / m(3))。帐户。反过来,这表明,如果沉积物中存在较大(较重)的基流,则它们会被PDC捕获。密集流动模型预测,PDC可能会夹带公制块,其最大尺寸(最多2-5 m)会随着大气压的降低(即高度增加)而减小。该模型的应用考虑了已发布的有关几个经过精心研究的火成岩的意外块特征的数据,表明母体致密PDC的速度高达25-30 m / s。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号