...
首页> 外文期刊>International Journal of Radiation Oncology, Biology, Physics >The TALON removable head frame system for stereotactic radiosurgery/radiotherapy: measurement of the repositioning accuracy.
【24h】

The TALON removable head frame system for stereotactic radiosurgery/radiotherapy: measurement of the repositioning accuracy.

机译:用于立体定向放射外科/放射治疗的TALON可移动头架系统:重新定位精度的测量。

获取原文
获取原文并翻译 | 示例

摘要

PURPOSE: To present the TALON removable head frame system as an immobilization device for single-fraction intensity-modulated stereotactic radiosurgery (IMRS) and fractionated stereotactic intensity-modulated radiotherapy (FS-IMRT); and to evaluate the repositioning accuracy by measurement of anatomic landmark coordinates in repeated computed tomography (CT) examinations. METHODS AND MATERIALS: Nine patients treated by fractionated stereotactic intensity-modulated radiotherapy underwent repeated CTs during their treatment courses. We evaluated anatomic landmark coordinates in a total of 26 repeat CT data sets and respective x, y, and z shifts relative to their positions in the nine treatment-planning reference CTs. An iterative optimization algorithm was employed using a root mean square scoring function to determine the best-fit orientation of subsequent sets of anatomic landmark measurements relative to the original image set. This allowed for the calculation of the x, y, and z components of translation of the target isocenter for each repeat CT. In addition to absolute target isocenter translation, the magnitude (sum vector) of isocenter motion and the patient/target rotation about the three principal axes were calculated. RESULTS: Anatomic landmark analysis over a treatment course of 6 weeks revealed a mean target isocenter translation of 0.95 +/- 0.55, 0.58 +/- 0.46, and 0.51 +/- 0.38 mm in x, y, and z directions, respectively. The mean magnitude of isocenter translation was 1.38 +/- 0.48 mm. The 95% confidence interval ([CI], mean translation plus two standard deviations) for repeated isocenter setup accuracy over the 6-week period was 2.34 mm. Average rotations about the x, y, and z axes were 0.41 +/- 0.36, 0.29 +/- 0.25, and 0.18 +/- 0.15 degrees, respectively. Analysis of the accuracy of the first repeated setup control, representative of single-fraction stereotactic radiosurgery situations, resulted in a mean target isocenter translation in the x, y, and z directions of 0.52 +/- 0.38, 0.56 +/- 0.30, and 0.46 +/- 0.25 mm, respectively. The mean magnitude of isocenter translation was 0.99 +/- 0.28 mm. The 95% confidence interval for these radiosurgery situations was 1.55 mm. Average rotations at first repeated setup control about the x, y, and z axes were 0.24 +/- 0.19, 0.19 +/- 0.17, and 0.19 +/- 0.12 degrees, respectively. CONCLUSION: The TALON relocatable head frame was seen to be well suited for immobilization and repositioning of single-fraction stereotactic radiosurgery treatments. Because of its unique removable design, the system was also seen to provide excellent repeat immobilization and alignment for fractionated stereotactic applications. The exceptional accuracy for the single-fraction stereotactic radiosurgical application of the system was seen to deteriorate only slightly over a 6-week fractionated stereotactic treatment course.
机译:目的:介绍TALON可移动头架系统,作为固定装置,用于单部分强度调制立体定向放射外科手术(IMRS)和分级立体定向强度调制放射治疗(FS-IMRT);并通过在重复的计算机断层扫描(CT)检查中测量解剖界标坐标来评估重新定位的准确性。方法和材料:9例接受立体定向强度调制放射治疗的患者在治疗过程中进行了多次CT检查。我们评估了总共26个重复CT数据集中的解剖界标坐标,并相对于它们在9个治疗计划参考CT中的位置分别进行了x,y和z移位。使用均方根评分函数使用迭代优化算法来确定相对于原始图像集的解剖学界标测量值的后续集合的最佳拟合方向。这允许计算每个重复CT的目标等角点平移的x,y和z分量。除了绝对目标等角点平移之外,还计算了等角点运动的幅度(和矢量)以及患者/目标物绕三个主轴的旋转。结果:在6周的治疗过程中进行的解剖标志性分析显示,在x,y和z方向上,平均目标等中心点平移分别为0.95 +/- 0.55、0.58 +/- 0.46和0.51 +/- 0.38 mm。等中心点平移的平均幅度为1.38 +/- 0.48 mm。在6周的时间内重复进行等中心测的准确度的95%置信区间([CI],平均平移加两个标准差)为2.34毫米。绕x,y和z轴的平均旋转分别为0.41 +/- 0.36、0.29 +/- 0.25和0.18 +/- 0.15度。对代表单个分数立体定向放射外科情况的第一个重复设置控制的精度进行分析后,得出x,y和z方向的平均目标等角点平移为0.52 +/- 0.38、0.56 +/- 0.30和分别为0.46 +/- 0.25毫米。等中心点平移的平均幅度为0.99 +/- 0.28 mm。这些放射外科手术情况的95%置信区间为1.55毫米。在第一次重复设置控制时,围绕x,y和z轴的平均旋转分别为0.24 +/- 0.19、0.19 +/- 0.17和0.19 +/- 0.12度。结论:TALON可重定位头架被认为非常适合固定和重新定位立体定向放射外科手术治疗。由于其独特的可移动设计,该系统还被认为可为分级立体定向应用提供出色的重复固定和对齐功能。观察到该系统的单部分立体定向放射外科手术应用的非凡准确性在经过6周的分次立体定向治疗过程中只会稍有下降。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号