Feedstock blending studies with laboratory indirectly heated gasifiers

摘要

To support the further development of indirectly heated gasifiers intended to provide fuels for advanced gas turbines, several indirectly heated laboratory gasifiers were constructed. During many comparative tests, advantages and problems witheach system were observed. The most useful systems make use of laboratory tube furnaces in conjunction with temperature, time, and pressure or volume yield measuring systems and a gas chromato graph with a thermal conductivity detector. In this paper,high temperature pyrolysis results obtained with the latest system are presented. Contrasting feedstocks suitable for commercial systems separately or in blends are used. Yield versus time measurements are used to determine relevant rate constants andoutputs. Since the rate constants are mainly reflective of heat transfer effects, cylindrical dowel sticks of varying radii were volatilized. The data set leads to an analytic heat transfer model that considers the hemicellulose, cellulose, and lignincomponents of the dowels. Also developed from the dowel experiments is an approximate procedure for estimating the proportionate releases of CO, CO{sub}2, CH{sub}4, and H{sub}2 for any type of biomass whose component proportions are known.