...
首页> 外文期刊>International Journal of Control >Achievable performance of multivariable systems with unstable zeros and poles
【24h】

Achievable performance of multivariable systems with unstable zeros and poles

机译:零点和零点不稳定的多变量系统可实现的性能

获取原文
获取原文并翻译 | 示例
           

摘要

This paper examines the fundamental limitations imposed by unstable (right half plane; RHP) zeros and poles in multivariable feedback systems. We generalize previously known controller-independent lower bounds on the H{sub}∞-norm of closed-loop transfer functions WXV, where X is input or output sensitivity or complementary sensitivity. The weights W and V may be unstable and non-minimum phase and may depend on the plant G. The bounds are tight for cases with only one RHP-zero or pole. For plants with RHP-zeros we obtain bounds on the output performance for reference tracking and disturbance rejection. For plants with RHP-poles we obtain new bounds on the input performance. This quantifies the minimum input usage needed to stabilize an unstable plant in the presence of disturbances or noise. For a one degree-of-freedom controller the combined effect of RHP-zeros and poles further deteriorate the output performance, whereas there is no such additional penalty with a two degrees-of-freedom controller where also the disturbance and/or reference signal is used by the controller.
机译:本文研究了多变量反馈系统中不稳定(右半平面; RHP)零点和极点所施加的基本限制。我们在闭环传递函数WXV的H {sub}∞范数上归纳了先前已知的独立于控制器的下界,其中X是输入或输出灵敏度或互补灵敏度。权重W和V可能是不稳定且非最小相位,并且可能取决于设备G。对于只有一个RHP-零或极点的情况,边界是严格的。对于RHP为零的工厂,我们获得了输出性能的界限,用于参考跟踪和干扰抑制。对于带有RHP极的工厂,我们在输入性能方面获得了新的界限。这量化了在存在干扰或噪声的情况下稳定不稳定工厂所需的最小输入使用量。对于一自由度控制器,RHP零点和极点的组合影响会进一步使输出性能恶化,而对于两自由度控制器,其中干扰和/或参考信号也是由控制器使用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号