首页> 外文期刊>Asian Journal of Chemistry: An International Quarterly Research Journal of Chemistry >Bubble-Particle Attachment Probability on Coarse Particles Flotation
【24h】

Bubble-Particle Attachment Probability on Coarse Particles Flotation

机译:粗颗粒浮选中的气泡-颗粒附着概率

获取原文
获取原文并翻译 | 示例
           

摘要

In this research,results are reported on the effect of impeller speed and air flow rate on flotation recovery for quartz particles of-590+212 urn.It is found that maximum flotation response was observed at impeller speed of 1100 rpm and 15 L/h air flow rate.For either more quiescent(impeller speed<1100 rpm)or more turbulent conditions,flotation recovery decreased steadily.Furthermore,amount of attachment probabilities is calculated using suitable equation.According to this study,with decreasing particle size,air flow rate and impeller speed,probability of attachment increased and with increasing contact angle,probability of attachment increased.For various air flow rates,impeller speed and particle size,collision angle has been calculated.Maximum collision angle obtained at 72.82° with 15 L/h air flow rate,particle size of 256 mu m and impeller speed of 700 rpm and minimum collision angle obtained at 64° with 45 L/h air flow rate,particle size of 256 mu m and impeller speed of 1300 rpm.In this study,maximum attachment angle,theta_(cr),was 39.33° around 75 L/h air flow rate,particle size of 256 um,contact angle of 90° and impeller speed of 1300 rpm and minimum attachment angle was 0.13° with 15 L/h air flow rate,particle size of 545 mu m,contact angle of 60° and impeller speed of 1300 rpm.
机译:本研究报道了叶轮速度和空气流速对-590 + 212 urn石英颗粒浮选回收率的影响的结果。发现在1100 rpm和15 L / h的叶轮转速下观察到最大浮选响应对于更大的静态(叶轮速度<1100 rpm)或更大的湍流条件,浮选回收率稳定下降。此外,使用合适的方程式计算附着概率的数量。根据这项研究,随着粒径的减小,空气流量叶轮速度,附着概率增加,并且接触角增加,附着概率增加。对于各种空气流量,叶轮速度和粒径,计算出碰撞角。在15.h / h的空气中最大碰撞角为72.82°流速,颗粒尺寸为256μm,叶轮速度为700 rpm,空气流速为45 L / h时,在64°时获得最小碰撞角,颗粒尺寸为256μm,叶轮速度为1300 rpm 。在这项研究中,最大附着角θ_(cr)在空气流量为75 L / h时为39.33°,颗粒大小为256 um,接触角为90°,叶轮速度为1300 rpm,最小附着角为0.13°。空气流量为15 L / h,颗粒大小为545μm,接触角为60°,叶轮速度为1300 rpm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号