Evaluation of three types of structured floating plastic media in moving bed biofilters for total ammonia nitrogen removal in a low salinity hatchery recirculating aquaculture system

摘要

Three different commercially available structural plastic media were evaluated in triplicate in moving bed biofilters under low salinity (11-12 ppt) warm water culture conditions and two different feed loading rates. The culture system consisted of nine separate modules that include a double drain fish culture tank paired to a moving bed biofilter. The biofilters were filled with 0.11 m(3) of one of three different types of floating plastic structured media. The three types of media evaluated were K1 kaldnes media, MB3 media, and AMB media. Volumetric total ammonia nitrogen (TAN) removal rates (g TAN removed/m(3) media-day). TAN removal efficiency, and biofilm kinetic constants, Kt (h(-1)) were determined for the three media types at two different daily feed load rates of 3.5 and 8.2 kg feed/m(3) media. The feed provided was a 4.8 mm slow sinking marine grower diet pellet (45% protein, 17% fat). Average ( standard deviation, SD) volumetric TAN removal rates (VTR) at the lower feed load for the three media types were 92.2 +/- 26.3, 86.1 +/- 27.5, and 82.5 +/- 25.9 for the MB3, AMB, and K1 kaldnes media, respectively. At the higher feed load the average VTR for the three media types was 186.4 +/- 53.7, 172.9 +/- 47.8, and 139.9 +/- 38.9 for the MB3, AMB, and K1 kaldnes media, respectively. Influent TAN concentrations varied by the feed load rate and ranged from 0.55 to 0.93 mg/L and 0.83 to 1.87 mg/L for the low and higher feed loads, respectively. The percent TAN removal rates for the MB3 media was the highest of the three media types at both the low and high feed load rates averaging 12.3% and 14.4%, respectively. The MB3 media was selected for use in the moving bed biofilters because of the greater VTR and removal efficiency results for use in the 0.11 m(3) moving bed biofilters of the hatchery recirculating aquaculture system