Investigation of Polymer Adsorption on Rock Surface of High Saline Reservoirs

摘要

Blocking or reducing water production from oil wells is a serious problem in oil industry. Two types of polymers, namely, polyacrylamide (PAA) and polysaccharides (xanthan) have been investigated in this paper. The viscosity of both polymer solutions was first evaluated at different salinities, shear rates and concentrations. Afterwards, the solutions were injected into core samples to examine the adsorption on the rock surface by calculating the resistance factor as well as the residual resistance factor. Also, the effect of the injection rate of the polymer solutions has been studied. The results show that xanthan solution is tolerant of high salinity (20%), while PAA solution is very sensitive to salt. Both polymer solutions show a pseudoplastic flow as a fuction of the shear rate. The core sample experiments show that both polymer solutions suffer a reduction in the adsorption rate with salinity increase. However, xanthan shows acceptable values even with a salinity up to 20% and a temperature of 60 deg C. Therefore, xanthan can be recommended to shut off water in high salinity and high temperature researvoirs. It was also found that the lower the injection rate the higher the adsorption on the rock surface.