首页> 外文期刊>Applied Catalysis, A. General: An International Journal Devoted to Catalytic Science and Its Applications >NiW/gamma-Al2O3 catalysts prepared by modified equilibrium deposition filtration (MEDF) and non-dry impregnation (NDI) - Characterization and catalytic activity evaluation for the production of low sulfur gasoline in a HDS pilot plant
【24h】

NiW/gamma-Al2O3 catalysts prepared by modified equilibrium deposition filtration (MEDF) and non-dry impregnation (NDI) - Characterization and catalytic activity evaluation for the production of low sulfur gasoline in a HDS pilot plant

机译:通过改进的平衡沉积过滤(MEDF)和非干浸渍(NDI)制备的NiW /γ-Al2O3催化剂-HDS中试工厂生产低硫汽油的表征和催化活性评估

获取原文
获取原文并翻译 | 示例
       

摘要

The aim of this study was to investigate the desulfurization of fluid catalytic cracking (FCC) gasoline using NiW supported on gamma -Al2O3 catalysts prepared by conventional non-dry impregnation (NDI) method and a new one, the equilibrium deposition filtration, (EDF). The latter has been modified (MEDF) to produce the required catalyst quantity for its evaluation in a hydrodesulfurization (HDS) pilot plant. The modification of the typical EDF method showed that it is possible to apply the principles of this technique for practical catalyst preparations. In the first part of this work, the catalyst preparation methodology and the catalyst characterization results are presented. In the second part, the catalyst evaluation is described, in relation to a commercial catalyst, concerning their HDS, hydrogenation (HYG) and isomerization (ISO) activities. The main conclusion of this study was that the MEDF method is more promising than the conventional NDI method for preparing NiW hydrotreatment catalysts. The catalyst prepared by MEDF exhibited higher HDS activity than that of the NDI one, comparable to that of a commercial CoMo catalyst and the highest HYG and ISO activities. The enhanced catalytic activity of the NiW-MEDF catalyst was attributed to the high dispersity of the supported phases achieved by the corresponding preparation method. (C) 2001 Elsevier Science B.V. All rights reserved. [References: 44]
机译:这项研究的目的是研究使用负载在传统的非干式浸渍(NDI)方法制备的γ-Al2O3催化剂上的NiW和一种新的平衡催化过滤法(EDF)对流化催化裂化(FCC)汽油进行脱硫。已对后者进行了修改(MEDF),以生产所需的催化剂数量,以便在加氢脱硫(HDS)中试工厂进行评估。对典型EDF方法的修改表明,可以将这种技术的原理应用于实际的催化剂制备。在这项工作的第一部分,介绍了催化剂的制备方法和催化剂的表征结果。在第二部分中,针对商用催化剂,描述了其HDS,氢化(HYG)和异构化(ISO)活性的催化剂评估。这项研究的主要结论是,MEDF法比常规的NDI法制备NiW加氢处理催化剂更有希望。与商用CoMo催化剂相比,由MEDF制备的催化剂显示出比NDI更高的HDS活性,并且具有最高的HYG和ISO活性。 NiW-MEDF催化剂的增强的催化活性归因于通过相应的制备方法实现的负载相的高分散性。 (C)2001 Elsevier Science B.V.保留所有权利。 [参考:44]

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号