Design and development of microfabricated capillary electrophoresis devices with electrochemical detection

摘要

Our efforts have been focused on developing a self-contained and transportable microfabricated electrophoresis (CE) system with integrated electrochemical detection (ED).The current prototype includes all necessary electrodes "on-chip" and utilizes miniaturized CE and ED supporting electronics custom designed for this purpose.State-of-the-art design/modeling tools and novel microfabrication procedures were used to create recessed platinum electrodes with complex geometries and the CE/ED device from two patterned ultra-flat glass substrates.The electrodes in the bottom substrate were formed by a self-aligned etch and deposition technique followed by a photolithographic lift-off process.The microchannels (20 mum deep X 65mum wide (average)) were chemically etched into the top substrate followed by thermal bonding to complete the microchip device.CE/ED experiments were performed using 0.02M phosphate buffer (pH6),an analyte/buffer solution (2.2mM dopamine,2.3mM catechol) and varying separation voltages (0-500 V) with a custom electrocs unit interfaced to a laptop computer for data acquisition.Detection limits (S/N=3) were found to be at the micromolar level and a linear detection response was observed up to millimolar concentrations for dopamine and catechol.The microchip CE/ED system injected 50 pl volumes of sample,which corresponded to mass detection limits on the order of 200 amol.For the first time,an integrated "on-chip" multi-electrode array CE/ED device was successfully designed,fabricated and tested.The majority of the electrodes (six out of eight) in the array were capable of detecting dopamine with the amplitude of the signal (i.e.,peak heights) decreasing as the electrode distance from the channel exit increased.