...
首页> 外文期刊>Applied thermal engineering: Design, processes, equipment, economics >Experimental description of bubble dynamics and heat transfer processes occurring on the pool boiling of water on biphilic surfaces
【24h】

Experimental description of bubble dynamics and heat transfer processes occurring on the pool boiling of water on biphilic surfaces

机译:在双硅表面泡泡水沸腾上发生泡沫动力学和传热过程的实验描述

获取原文
获取原文并翻译 | 示例

摘要

This study concerns the detailed description of the fluid dynamics and heat transfer mechanisms occurring during single bubble nucleation on biphilic surfaces (superhydrophilic/hydrophilic surfaces surrounding hydrophobic/superhydrophobic isles). A high-speed video camera is synchronized with a high-speed thermographic camera to relate the temporal evolution of bubble dynamics, from generation to detachment. The results allowed identifying several stages of bubble growth in all the biphilic surfaces tested, regardless of the size of the superhydrophilic regions. Bubble dynamics is affected by the size of the superhydrophobic regions. Since bubbles are constrained to the superhydrophobic region boundaries, which alter their base diameter, smaller superhydrophobic regions tend to promote a regular and stable bubble generation, due to the action of stronger surface tension forces acting on the boundary region. As the base diameter increases, the surface tension effects, which only act at the boundary with the hydrophilic region, are lessened and only affect the bubble at larger volumes. Consequently, smaller superhydrophobic regions are associated to higher evaporation mass transfer rates. Temperature gradients are larger at the hydrophilic/superhydrophobic boundaries and despite being small amplitude differences, they clearly promote induced convection of the cold liquid between superhydrophobic regions, as observed in the high-speed thermographic images.
机译:该研究涉及在脂合物表面上的单一泡沫成核期间发生流体动力学和传热机制的详细描述(疏水/超疏水虫的过硫基/亲水性表面)。高速摄像机与高速热量摄像机同步,以涉及泡沫动力学的时间演变,从代代发电到分离。结果允许鉴定测试的所有脂硅表面的泡沫生长的几个阶段,无论超硫酸区的大小如何。泡沫动力学受超疏水区大小的影响。由于泡沫被约束到超疏水区边界,其改变它们的基础直径,因此由于作用在边界区域上的较强的表面张力力的作用,较小的超疏水区域倾向于促进常规和稳定的气泡产生。随着基部直径的增加,仅减少仅在具有亲水区域的边界处作用的表面张力效应,并且仅在较大的体积下影响气泡。因此,较小的超疏水区与较高的蒸发传质速率相关。亲水/超疏水界限的温度梯度较大,尽管幅度差异小,但是在高速热成像图像中观察到的超疏水区之间清楚地促进了冷液之间的诱导对流。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号