...
首页> 外文期刊>Applied thermal engineering: Design, processes, equipment, economics >A comparative study of the performance of solar ponds under Middle Eastern and Mediterranean conditions with batch and continuous heat extraction
【24h】

A comparative study of the performance of solar ponds under Middle Eastern and Mediterranean conditions with batch and continuous heat extraction

机译:中东地中海条件下太阳能池塘和连续热萃取的比较研究

获取原文
获取原文并翻译 | 示例

摘要

This study presents a novel heat extraction method, which can be operated in batch or continuous, modes for salinity gradient solar ponds. A comparison between the performance of two solar ponds of the same size (10,000 m(2)) in Adana (Turkey) and Ahvaz (Iran) is also presented. The heat extraction method entails brine removal from the non-convective zone (NCZ) as well as the heat storage zone (HSZ). The presented model incorporates the heat losses from the bottom and surface of the pond as well as the cooling effect imposed as a consequence of the replacement of extracted brine from each layer, and the supply of freshwater to the surface of the pond to maintain its inventory. The model can be employed to predict the performance of solar ponds of various dimensions for any given location. It was established that the pond modelled for Ahvaz would perform 30% better than the pond in Adana in both batch and continuous heat extraction modes, predominantly due to the higher quantities of solar energy reaching the surface of the pond and the higher air temperatures throughout the year at this location. The quantities of heat provided in the first year of operation from the ponds in Adana and Ahvaz in batch mode extraction are 2.8 x 10(6) MJ and 4.0 x 10(6) MJ, respectively. These values are approximately three times higher than those from the continuous mode of heat extraction due to the larger volume of withdrawal in the batch mode. Using the proposed heat extraction method in batch mode, 85% of the total heat is removed from the HSZ while this is just over 50% for the continuous mode indicating the better energy storage performance of the batch mode. Both heat extraction modes offer an efficient mechanism of stabilising a temperature gradient throughout the pond with the aim of insulating the HSZ for heat storage. This is carried out by designating brine removal thresholds of 70 degrees C, 80 degrees C and 90 degrees C within the NCZ and 95 degrees C in the HSZ. It is also demonstrated that the requirement for the supply of freshwater to the surface of solar ponds is significantly dependant on the wind velocity at each location and is unaffected by the mode of heat extraction. (C) 2017 Published by Elsevier Ltd.
机译:本研究提出了一种新型热萃取方法,可以分批或连续操作,用于盐度梯度太阳能池。还介绍了Adana(土耳其)和Ahvaz(伊朗)相同大小(10,000米(2))的太阳能池的性能之间的比较。热萃取方法需要从非对流区(NCZ)以及蓄热区(HSZ)的盐水去除。所提出的模型包括来自池塘的底部和表面的热量损失以及由于从每层替换所提取的盐水而施加的冷却效果,以及淡水供应到池塘的表面以维持其库存。该模型可以用于预测任何给定位置的各种尺寸的太阳能池的性能。建立了对Ahvaz的池塘模型比批量和连续热提取模式的阿纳纳中的池塘更好地表现为30%,主要是由于达到池塘表面的较高的太阳能和整个空气温度的较高的太阳能和较高的空气温度在这个位置。从Adana和AhvaZ中的池塘的第一年提供的热量中提供的热量分别为2.8×10(6)MJ和4.0×10(6)MJ。由于批量模式中的批量较大,这些值大约比来自连续热提取模式的值高出三倍。在批量模式下使用所提出的热提取方法,从HSZ中取出总热量的85%,而连续模式显示为批量模式更好的能量存储性能超过50%。两个热萃取模式都提供了一种有效的机制,可以在整个池塘中稳定温度梯度,其目的是绝缘HSZ进行热量储存。这是通过在HSZ中的NCZ和95摄氏度内的70℃,80℃和90摄氏度的盐水去除阈值中指定盐水去除阈值来执行。还表明,对太阳能池表面供应淡水的要求显着取决于每个位置的风速,并且不受热提取方式的影响。 (c)2017年由elestvier有限公司出版

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号