...
首页> 外文期刊>Angewandte Chemie >Reversible Conversion of Conducting Polymer Films from Superhydrophobic to Superhydrophilic
【24h】

Reversible Conversion of Conducting Polymer Films from Superhydrophobic to Superhydrophilic

机译:将聚合物薄膜从超疏水转化为超硫酸的可逆转化

获取原文
获取原文并翻译 | 示例

摘要

Controlling the wettability of a solid surface is important for myriad applications, ranging from self-cleaning surfaces to microfluidics to biomedicine.[1]-[3] Recently, a variety of smart surfaces with reversibly switchable wettability have been developed. The reversible switching is realized through the adjustment of electrical potential,[4]-[6] temperature,[7], [8] and light illumination,[9]-[13] adsorption of biopolymer,[14] and treatment of selective solvents.[15], [16] Among these approaches, the switch of the electrical potential receives special attention because it is simple and conveniently controlled by electricity. Moreover, the switching is readily individually addressable when an array of small surfaces is involved. Lahann et al.[4] constructed a reversibly switching surface by depositing a low-density carboxylate-terminated self-assembled monolayer on a gold surface. Electrical potential was used to trigger the conformational transition of the monolayer, resulting in switching of the surface wettability. However, the change in surface wettability is small (20 to 30? water contact angle), which is likely to limit its practical applications. It is reported that ZnO films[11], [12] and poly(N-isopropylacrylamide)-modified patterned surfaces[7] can undergo reversible wettability switching between two extremes, superhydrophobicity (water contact angle>150?) and superhydrophilicity (water contact angle<5?) through the use of ultraviolet light and a temperature change, respectively. The photoswitching requires several days to achieve the hydrophilic-to-hydrophobic conversion, and both the photoswitching and thermal switching are difficult to implement to individually address an array of small surfaces. Herein we report a simple electrochemical process to fabricate superhydrophobic conducting polypyrrole (PPy) films and demonstrate that their properties can be switched conveniently from superhydrophobic to superhydrophilic by changing the electrical potential.
机译:控制固体表面的润湿性对于无数应用是重要的,从自清洁表面到微流体到生物医学。[1] - [3]最近,已经开发出各种具有可逆可转换润湿性的智能表面。通过调节电位,[4] - [6]温度,[7],[8]和光照射,实现可逆切换,[9] - [13]吸附生物聚合物,[14]和选择性的治疗溶剂。[15],[16]在这些方法中,电势的开关是特别注意,因为它简单且方便地受电。此外,当涉及小表面阵列时,切换是易于单独寻址的。 Lahann等人。[4]通过在金表面上沉积低密度羧酸封端的自组装单层构造可逆的切换表面。电势用于触发单层的构象过渡,导致表面润湿性的切换。然而,表面润湿性的变化很小(20至30?水接触角),这可能会限制其实际应用。据报道,ZnO膜[11],[12]和聚(N-异丙基丙烯酰胺)制胺化图案化表面[7]可以在两个极端,超疏水性(水接触角> 150°之间的可逆润湿性切换进行可逆润湿性切换(水接触角度<5?)通过使用紫外线和温度变化。光学开关需要几天以实现亲水 - 疏水转换,并且光学开关和热切换难以实现以单独地寻址一系列小表面。在此,我们报告了一种简单的电化学方法,用于制造超疏水导电聚吡咯(PPY)膜,并证明通过改变电位,可以方便地从超细杂志方便地切换到超中水。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号