Effect of surface heat transfer coefficient gradient on thermal shock failure of ceramic materials under rapid cooling condition

摘要

A rapid thermal processor (RTP) device as well as quenching technique is employed to systematically investigate the effect of surface heat transfer coefficient (h) gradient on thermal shock failure of a hot-pressed ZrB2-based ceramic. Two typical kinds of quenchant with different surface h gradients during quenching tests, water and boiling water, are used for this study. When water as the cooling medium, two different cooling modes of indirect contact cooling by RTP device and direct contact cooling by quenching are also studied. The experimental results and related numerical simulations illustrate that surface h gradient plays an important role in thermal shock failure. This study confirms the previous presumption that the combination of body temperature gradient and surface h gradient leads to thermal stress damage and thermal shock failure. Under water quenching condition, water phase changes form bubbles randomly and produce great surface h gradient. Accordingly, critical body temperature gradient (V(max)(c)) is small (similar to 270 degrees C s(-1)). Under aqueous polymer quenching condition, the introduction of polymer chains into water lowers the random formation of steam bubble and mediates the surface h gradient. The corresponding V(max)c hence become larger (similar to 500 degrees C s(-1)) Under boiling water quenching condition, there is no surface h gradient and V(max)(c) is even larger (600 degrees C s(-1)). This study provides useful complementary information for understanding the thermal shock behavior and gives suggests for predicting materials performance in actual service.