...
首页> 外文期刊>ACS catalysis >Ruthenium Nanoparticles Supported on Carbon: An Active Catalyst for the Hydrogenation of Lactic Acid to 1,2-Propanediol
【24h】

Ruthenium Nanoparticles Supported on Carbon: An Active Catalyst for the Hydrogenation of Lactic Acid to 1,2-Propanediol

机译:碳负载钌纳米颗粒:乳酸加氢合成1,2-丙二醇的活性催化剂

获取原文
获取原文并翻译 | 示例

摘要

The hydrogenation of lactic acid to form 1,2-propanediol has been investigated using Ru nanoparticles supported on carbon as a catalyst. Two series of catalysts which were prepared by wet impregnation and sol-immobilization were investigated. Their activity was contrasted with that of a standard commercial Ru/C catalyst (all catalysts comprise 5 wt % Ru). The catalyst prepared using sol-immobilization was found to be more active than the wet impregnation materials. In addition, the catalyst made by sol-immobilization was initially more active than the standard commercial catalyst. However, when reacted for an extended time or with successive reuse cycles, the sol-immobilized catalyst became less active, whereas the standard commercial catalyst became steadily more active. Furthermore, both catalysts exhibited an induction period during the first 1000 s of reaction. Detailed scanning transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray absorption fine structure analysis data, when correlated with the catalytic performance results, showed that the high activity can be ascribed to highly dispersed Ru nanoparticles. Although the sol-immobilization method achieved these optimal discrete Ru nanoparticles immediately, as can be expected from this preparation methodology, the materials were unstable upon reuse. In addition, surface lactide species were detected on these particles using X-ray photoelectron spectroscopy, which could contribute to their deactivation. The commercial Ru/C catalysts, on the other hand, required treatment under reaction conditions to change from raft-like morphologies to the desired small nanoparticle morphology, during which time the catalytic performance progressively improved.
机译:已经使用负载在碳上的Ru纳米颗粒作为催化剂,研究了乳酸氢化形成1,2-丙二醇的方法。研究了湿法浸渍和溶胶固定法制备的两种催化剂。它们的活性与标准的工业Ru / C催化剂的活性相反(所有催化剂包含5wt%的Ru)。发现使用溶胶固定化制备的催化剂比湿浸渍材料更具活性。另外,通过溶胶固定化制备的催化剂最初比标准的商业催化剂更具活性。然而,当反应延长时间或连续重复使用时,溶胶固定化催化剂的活性降低,而标准商品催化剂的活性逐渐稳定。此外,两种催化剂在反应的前1000 s都表现出诱导期。详尽的扫描透射电子显微镜,X射线光电子能谱和X射线吸收精细结构分析数据与催化性能结果相关时表明,高活性可以归因于高度分散的Ru纳米颗粒。尽管可以通过溶胶固定化方法立即获得这些最佳的离散Ru纳米颗粒,但可以从这种制备方法中预期到,但是这些材料在重新使用时不稳定。此外,使用X射线光电子能谱在这些颗粒上检测到表面丙交酯物种,这可能有助于它们的失活。另一方面,商业Ru / C催化剂需要在反应条件下进行处理以从筏状形态改变为所需的小纳米粒子形态,在此期间催化性能逐渐提高。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号