首页> 外文期刊>Journal of Statistical Physics >An Alternative High-Density Ratio Pseudo-potential Lattice Boltzmann Model with Surface Tension Adjustment Capability
【24h】

An Alternative High-Density Ratio Pseudo-potential Lattice Boltzmann Model with Surface Tension Adjustment Capability

机译:具有表面张力调节能力的替代高密度比伪电位晶格Boltzmann模型

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In this paper, an alternative model is presented to simultaneously achieve thermodynamic consistency, leading to high-density ratios, and surface tension adjustment capability based on the pseudo-potential lattice Boltzmann model (LBM). These features are achieved by adding two relatively simple terms, each with an adjustable coefficient, selected from the Taylor expansion of the original interaction force, one for achieving and maintaining thermodynamic consistency, and the other for adjusting the surface tension independent of the density ratio. The model also takes advantage of being independent of using SRT, MRT, 2D or 3D lattice models. The capability of the model is evaluated and verified by performing several static and dynamic benchmark test cases. First, the coexistence densities extracted for a flat interface from the model are compared with those of the Maxwell equal area rule in a wide temperature range. Results show that the thermodynamic consistency is well achieved and the coexistence densities are independent of the surface tension strength as well. Next, the well-known Laplace law for a droplet is evaluated and satisfied with the model. In addition, a wide range of surface tension values is achievable at a fixed temperature by adjusting the surface tension adjustment coefficient. After that, the ellipsoidal droplet oscillation is simulated with a good agreement between the analytical and numerical results for the oscillation period. The spurious velocities around the droplet are then evaluated and shown to be reasonable, and comparatively low even at a relatively high-density ratio around of 2400. It was found that the magnitude of these velocities can be further reduced, especially at high-density ratios, by reducing the liquid to gas dynamic viscosity ratio or equivalently increasing the gas to liquid kinematic viscosity ratio. Next, the stability, and the fascinating phenomenon of symmetric bifurcation of a rotating planar droplet are simulated a
机译:在本文中,提出了一种替代模型以同时实现热力学稠度,导致高密度比率和基于伪电位晶格Boltzmann模型(LBM)的表面张力调节能力。这些特征是通过添加两个相对简单的术语来实现,每个术语具有可调节系数,从原始相互作用力的泰勒膨胀中选择,一个用于实现和保持热力学稠度,另一个用于调节与密度比无关的表面张力。该模型还利用SRT,MRT,2D或3D格式模型来利用。通过执行多个静态和动态基准测试用例来评估模型的能力和验证。首先,将从模型中提取的平面接口提取的共存密度与宽温度范围内的麦克斯韦平等区域规则的平面界面进行比较。结果表明,达到热力学一致性,并且共存密度也与表面张力强度无关。接下来,对模型评估和满足液滴的众所周知的拉普拉斯法律。另外,通过调节表面张力调节系数,可以在固定温度下实现各种表面张力值。之后,在振荡周期的分析和数值结果之间模拟椭圆虫液滴振荡的模拟。然后评估液滴周围的杂散速度并显示出合理的,并且甚至以相对高密度的比例为约2400.发现可以进一步降低这些速度的大小,特别是在高密度比率下,通过将液体降低到气体动态粘度比或等效地增加气体与液体运动粘度比。接下来,模拟旋转平面液滴对称分叉的稳定性和迷人现象

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号