首页> 外文期刊>Journal of orthopaedic research >Zirconia phase transformation in retrieved, wear simulated, and artificially aged ceramic femoral heads
【24h】

Zirconia phase transformation in retrieved, wear simulated, and artificially aged ceramic femoral heads

机译:在检索,磨损模拟和人工老化陶瓷股头中的氧化锆相变

获取原文
获取原文并翻译 | 示例
           

摘要

Zirconia in Zirconia toughened alumina ceramic hip replacements exists in an unstable state and can transform in response to stress giving the material improved fracture toughness. Phase transformation also occurs under hydrothermal conditions such as exist in vivo. To predict the hydrothermal aging that will occur in vivo accelerated aging procedures have been used, but validation of these models requires the study of retrieved hip joints. Here 26 retrievals are analysed to determine the degree of phase transformation in vivo. These were compared with virgin heads, heads that had undergone the accelerated aging process and heads wear tested to 5 million cycles in a hip simulator. Monoclinic content and surface roughness were measured using Raman spectroscopy and white light interferometry respectively. The monoclinic content for retrieved heads was 28.5%+/- 7.8, greater than twice that in virgin, aged, or wear tested heads and did not have a significant correlation with time, contrary to the predictions of the hydrothermal aging model. The surface roughness for retrieved heads in the unworn area was not significantly different to that in virgin, aged, or unworn areas of wear tested heads. However in worn areas of the retrieved heads, the surface roughness was higher than observed in wear simulator testing. These results indicate that current testing methodologies do not fully capture the operational conditions of the material and the real performance of future new materials may not be adequately predicted by current pre-clinical testing methods. (c) 2017 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society 35:2781-2789, 2017.
机译:氧化锆中的氧化锆增韧氧化铝陶瓷髋关节替代品在不稳定状态下存在,并且可以响应应力转化,使材料改善裂缝韧性。相变也发生在诸如存在体内的水热条件下。为了预测将使用将发生在体内加速的老化程序中的水热老化,但这些模型的验证需要研究检索的髋关节。这里分析了26检索以确定体内相变的程度。将这些与维珍头部相比,经过加速老化过程的头部,头部磨损在髋部模拟器中测试500万个循环。使用拉曼光谱和白色光干涉测量测量单斜液含量和表面粗糙度。检索头的单斜含量为28.5%+ / - 7.8,大于处于处女,老年人或磨损的头部的两倍,并且与水热老化模型的预测相反,与时间相关的两倍。在磨损的头部的处女,老年人或未磨损的头部的处于磨损的头部的较大的区域的表面粗糙度并没有显着差异。然而,在检索到的头部的破坏区域中,表面粗糙度高于磨损模拟器测试中观察到的表面粗糙度。这些结果表明,目前的测试方法没有完全捕获材料的操作条件,并且通过当前的临床预审测试方法可能无法充分预测未来新材料的实际性能。 (c)2017作者。岩身研究杂志CHINESE由Wiley期刊出版,Inc。代表骨科研究会35:2781-2789,2017。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号