首页> 外文期刊>Journal of loss prevention in the process industries >Effects of silicone rubber and aerogel blanket-walled tubes on H-2/Air gaseous detonation
【24h】

Effects of silicone rubber and aerogel blanket-walled tubes on H-2/Air gaseous detonation

机译:硅橡胶和气凝钉壁管对H-2 /空气爆炸的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The experimental study of hydrogen-air detonation was performed in a 6.3-m-long circular cross-section tube, the rear section of which was walled by silicone or aerogel material. Mixtures of 25% or 29.6% hydrogen with air by volume with an initial pressure of 0.1 MPa and temperature of 293 K were used in the experiments. A short Shchelkin spiral was fixed at the tube head to accelerate the deflagration-to detonation transition. The flame and pressure wave propagation velocities were measured by ion probes and pressure transducers, respectively. The detonation regimes and velocities of flame propagation in walled tubes of different materials were compared. It was found that it is difficult for a silicone rubber-walled tube to reduce the intensity of the detonation wave. In this case, for the stoichiometric mixture, a reduction in the propagation velocity by 5% and the pressure peak by 12% was recorded in order to compare those parameters in a stainless smooth tube. An aerogel blanket wall has a strong ability to reduce the intensity of the detonation wave with the peak pressure decreased by 35% for the stoichiometric hydrogen-air mixture. The attenuation of the steady detonation wave can occur in the aerogel blanket-walled tube under the present experimental conditions. This is because of the effective suppression of transverse waves by interaction with the aerogel wall; then, the generation of stable detonation cells is no longer possible, and thus, the shock wave and flame front are decoupled, and detonation is suppressed. (C) 2017 Elsevier Ltd. All rights reserved.
机译:在6.3米长的圆形横截面管中进行氢气爆炸的实验研究,其后部由硅氧烷或气凝胶材料壁。在实验中使用25%或29.6%氢气体积的25%或29.6%的混合物,并且在实验中使用了0.1MPa的初始压力和293k的温度。在管头处固定了一个短的Shchelkin螺旋,以加速爆燃至爆炸转变。通过离子探针和压力换能器测量火焰和压力波传播速度。比较了不同材料壁管中的爆轰方案和火焰繁殖的速度。发现硅橡胶壁管难以降低爆炸波的强度。在这种情况下,对于化学计量混合物,记录传播速度的减少5%,并且压力峰值以12%的压力峰值进行记录,以比较不锈钢光滑管中的那些参数。气体橡皮布墙具有很强的能力,可以降低爆震波的强度,其峰值压力降低35%,用于化学计量氢气混合物。在本实验条件下,在气凝胶橡胶壁管中可以发生稳定爆震波的衰减。这是因为通过与气凝胶墙的相互作用有效地抑制横波;然后,不再可能产生稳定的爆轰电池,因此,冲击波和火焰前沿分离,并且抑制爆炸。 (c)2017 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号