...
首页> 外文期刊>Journal of instrumentation: an IOP and SISSA journal >Sub-microsecond x-ray imaging using hole-collecting Schottky type CdTe with charge-integrating pixel array detectors
【24h】

Sub-microsecond x-ray imaging using hole-collecting Schottky type CdTe with charge-integrating pixel array detectors

机译:使用具有电荷集成像素阵列检测器的空穴收集肖特基式CDTE的次微秒X射线成像

获取原文
获取原文并翻译 | 示例
           

摘要

CdTe is increasingly being used as the x-ray sensing material in imaging pixel array detectors for x-rays, generally above 20 keV,where silicon sensors become unacceptably transparent. Unfortunately CdTe suffers from polarization, which can alter the response of the material over time and with accumulated dose. Most prior studies used long integration times or CdTe that was not of the hole-collecting Schottky type. We investigated the temporal response of hole-collecting Schottky type CdTe sensors on timescales ranging from tens of nanoseconds to several seconds. We found that the material shows signal persistence on the timescale of hundreds of milliseconds attributed to the detrapping of a shallow trap, and additional persistence on sub-microsecond timescales after polarization. The results show that this type of CdTe can be used for time resolved studies down to approximately 100 ns. However quantitative interpretation of the signal requires careful attention to bias voltages, polarization and exposure history.
机译:CDTE越来越多地被用作成像像素阵列探测器的X射线传感材料,用于X射线,通常高于20keV,其中硅传感器变得不可接受地透明。遗憾的是Cdte遭受极化,这可以随时间改变材料的响应和累积剂量。大多数事先研究使用的是长的整体时间或CDTE,其不是收集的肖特基型。我们调查了空穴收集的肖特基式CDTE传感器的时间响应,以几十秒钟到几秒钟。我们发现该材料显示了数百毫秒的信号持久性,其归因于浅陷阱的凹陷,以及在极化之后的子微秒时间尺寸上的额外持久性。结果表明,这种类型的CDTE可用于将分辨的研究降至约100ns。然而,信号的定量解释需要仔细关注偏置电压,极化和曝光史。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号