首页> 外文期刊>Journal of geophysical research. Planets >Formation of Central Pits in Impact Craters on Mars: A Statistical Investigation of Proposed Mechanisms
【24h】

Formation of Central Pits in Impact Craters on Mars: A Statistical Investigation of Proposed Mechanisms

机译:MARS上冲击陨石坑中央坑的形成:提出机制的统计调查

获取原文
获取原文并翻译 | 示例
           

摘要

Central pit craters (CPCs) are complex craters that exhibit depressions within their floors or central uplifts. Some proposed models for central pit formation can be grouped by similar mechanism: (A) explosive volatile release, (B) central peak collapse, and (C) drainage of subsurface melted volatiles. We test these groups of mechanisms for central pit formation on Mars based on morphometries expected from each mechanism. Volatiles in the target (A and C) would be expected to result in a correlation with layered ejecta, also formed from volatiles, for CPCs over non-CPCs. Central peak collapse (B) should result in larger diameters for pit rims than central peaks due to outward flow. Explosive volatile release (A) should yield smaller volumes for pit rims than pits due to mass loss. Data were collected on Context Camera images and digital elevation models for random samples of CPCs to assess the presence of these expected morphologies. Results of a Fisher exact test showed no preference in layered ejecta with CPCs over non-CPCs, inconsistent with volatiles in the target. Results of an independent t test showed that central pit rim diameters are larger than central peak diameters, supporting some component of central peak collapse, although measurement uncertainty makes this interpretation tentative. Central pit rim volumes were not found to be statistically smaller than their pits, weighing against formation by explosive volatile release. Thus, our findings do not support any single group of formation mechanism tested here, although they allow for formation by some combination of these (or other) processes.
机译:中央坑陨石坑(CPC)是复杂的陨石坑,其在其地板或中央隆起内表现出凹陷。一些拟议的中央坑形成模型可以通过类似的机制进行分组:(a)爆炸性挥发性释放,(b)中央峰塌陷,(c)地下熔化挥发物的引流。我们根据每种机制预期的形态量测定,测试这些用于中央坑形成的机制组。预期靶(A和C)中的挥发物将导致与挥发物形成的层状喷射物相关,用于非CPC上的CPC。中央峰值折叠(B)应导致坑轮的直径比由于外侧流动的中心峰值。爆炸性挥发性释放(A)应产生比由于质量损失引起的凹坑凹凸的较小体积。收集数据上的上下文相机图像和数字高程模型,用于CPC的随机样本,以评估这些预期形态的存在。 Fisher精确试验的结果显示在分层喷射物中没有CPC在非CPC上的偏好,与目标中的挥发物不一致。独立T检验的结果表明,中央坑轮辋直径大于中央峰直径,支撑中央峰值塌陷的一些成分,尽管测量不确定性使得这种解释暂定。没有发现中央坑轮辋体积比姿势小于它们的坑,通过爆炸性挥发性释放来称重形成。因此,我们的发现不支持这里测试的任何单一的形成机制,尽管它们允许通过这些(或其他)过程的某种组合形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号