首页> 外文期刊>Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems >Porous structure uniformity investigation of tungsten matrix prepared by jet milled and annealed tungsten powder
【24h】

Porous structure uniformity investigation of tungsten matrix prepared by jet milled and annealed tungsten powder

机译:喷射磨削钨粉制备的钨基质的多孔结构均匀性研究

获取原文
获取原文并翻译 | 示例
           

摘要

The correlation between tungsten powder properties and porosity characteristics of porous tungsten matrix have been investigated in this paper. With the deagglomeration and classification, monodisperse tungsten powders of different particle size with narrow particle size distribution have been obtained. Multi-step annealing operation with continuously increasing temperature was taken to reduce the particle activity, which are conductive to particle size homogenization, shape modification and purification simultaneously. The press-sintered porous tungsten matrix prepared by jet milled and annealed tungsten powder presents homogeneous inter-connected pores with uniform pore size and distribution, indicating that low-activity monodisperse powder with narrow particle size distribution is required for manufacturing homogeneous porous tungsten matrix. (C) 2018 Elsevier B.V. All rights reserved.
机译:本文研究了多孔钨基质的钨粉性能与孔隙率特征的相关性。 通过解聚和分类,已经获得了具有窄粒度分布的不同粒度的单分散钨粉。 采用连续增加温度的多步骤退火操作以减少颗粒活性,其与粒度均匀化,同时形状改性和纯化。 通过喷射研磨和退火的钨粉制备的压烧烧结多孔钨基质具有均匀的孔径和分布的均匀连接的孔,表明颗粒尺寸分布的低活性单分散粉末用于制造均匀的多孔钨基质。 (c)2018 Elsevier B.v.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号