首页> 外文期刊>Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems >Analysis of interparticle forces and particle-wall interactions by powder bed pressure drops at incipient fluidization
【24h】

Analysis of interparticle forces and particle-wall interactions by powder bed pressure drops at incipient fluidization

机译:粉床压力下初级颗粒颗粒力和颗粒壁相互作用分析

获取原文
获取原文并翻译 | 示例
           

摘要

A novel method is proposed to evaluate the interparticle forces and particle-wall interactions based on the pressure drop measurements at incipient fluidization. In the first experiment, we used the liquid bridge force as the model interparticle force of the glass ballotini (53 mu m - 105 mu m). The theoretical relationship between the model liquid bridge force and the liquid addition volume was successfully presented. In the second part of experiment, the interparticle forces and the particle-wall interaction of cornstarch powders in a Perspex cylinder are determined. While the particle-wall interaction shows a linear relationship with the apparent bed-wall contact area, the interparticle force follows a logarithm relation with the bed mass for the Warren-Spring-type cornstarch powders. The results were also compared to the cohesion values obtained by a conventional shear tester. The results conclude that our method serves as an economically and accurate alternative to conventional shear testers. (C) 2017 Elsevier B.V. All rights reserved.
机译:提出了一种新的方法,以评估基于初始流化的压降测量的颗粒力和颗粒壁相互作用。在第一次实验中,我们使用液体桥力作为玻璃球机的模型力力(53μm - 105 mu m)。成功地呈现了模型液体桥力与液体添加量之间的理论关系。在实验的第二部分中,确定了颈晶粉末在Perspex圆柱体中的颗粒体力和粒子 - 壁相互作用。虽然颗粒壁相互作用显示与表观床壁接触面积的线性关系,但颗粒力力遵循与沃伦 - 弹簧型玉米粉粉的床肿块的对数。还将结果与常规剪切测试仪获得的内聚值进行比较。结果得出结论,我们的方法用作传统剪切测试仪的经济和准确的替代品。 (c)2017 Elsevier B.v.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号