...
首页> 外文期刊>Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems >A novel fractal solution for permeability and Kozeny-Carman constant of fibrous porous media made up of solid particles and porous fibers
【24h】

A novel fractal solution for permeability and Kozeny-Carman constant of fibrous porous media made up of solid particles and porous fibers

机译:一种新的纤维状多孔介质渗透性和Kozeny-Carman常数的一种新型分形溶液,由固体颗粒和多孔纤维组成

获取原文
获取原文并翻译 | 示例
           

摘要

This paper presents a novel fractal solution to investigate the permeability and the Kozeny-Carman (KC) constant of fibrous porous media made up of solid particles and porous fibers. The proposed model has been verified with satisfying agreements of the permeability and KC constant of fibrous porous media obtained by our model and those obtained by experimental data, analytical solution, and numerical simulation reported in literature. The results demonstrate that 1) an increase in particle diameter leads to an increase in the absolute permeability; 2) an increase in the tortuosity fractal dimension leads to an increase in the KC constant and decreases in the dimensionless permeability and absolute permeability; 3) an increase in the porosity results in increases in the dimensionless permeability and absolute permeability of the fibrous porous media; 4) increases in the fiber diameter yields an increase in the absolute permeability of fibrous porous media. The proposed fractal model explicitly relates the KC constant and the permeability to the microstructural parameters of the fibrous porous media, and consequently facilitating the understanding of the detailed physical mechanisms for fluids transport through fibrous porous media. (C) 2019 Elsevier B.V. All rights reserved.
机译:本文介绍了一种新的分形解决方案,用于研究由固体颗粒和多孔纤维组成的纤维多孔介质的渗透性和Kozeny-Carman(KC)常数。拟议的模型已经通过我们的模型获得的纤维状多孔介质的渗透率和KC常数达到符合我们的模型,并通过实验数据,分析解决方案获得的符合符合的辅助符合的符合符合的辅助性和KC常数。结果表明,1)粒径的增加导致绝对渗透性的增加; 2)曲折分形尺寸的增加导致KC常数增加,减半渗透性和绝对渗透率降低; 3)孔隙率的增加导致纤维状多孔介质的无量纲渗透性和绝对渗透性的增加; 4)纤维直径的增加产生纤维状多孔介质的绝对渗透性的增加。所提出的分形模型明确地将KC常数和渗透率涉及纤维状多孔介质的微观结构参数,从而促进通过纤维多孔介质的流体输送的详细物理机制。 (c)2019年Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号