...
首页> 外文期刊>Structural Chemistry >Ti functionalized carbon and boron nitride chains: a promising material for hydrogen storage
【24h】

Ti functionalized carbon and boron nitride chains: a promising material for hydrogen storage

机译:Ti官能化碳和氮化硼链:储氢的有希望的材料

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The geometries, electronic structures, thermochemical properties, polarizabilities, and hyperpolarizabilities of high capacity hydrogen storage media consisting of alkali metal such as Li or transition metal as Ti, that is, functionalized at the end of C and BN chains have been investigated theoretically using density functional theory (DFT). Fundamental aspects such as interaction energy, natural bond orbital (NBO), charge transfer, energy gap, and the projected density of states (PDOS) are elucidated to analyze the adsorption properties of H-2 molecules. Our results revealed that H-2 is introduced sequentially on the Ti-C-7, Ti-(B)-B4N3, and Ti-(N)-B3N4 complexes and the H-2 uptake capacity are found to be 10.89, 10.80, and 10.58 wt%, respectively. Moreover, two Ti atoms can be adsorbed concomitantly to the ends of C-7, B4N3, and B3N4 chains where Ti sites can accommodate 16 H-2 molecules, with 8 per Ti center, leading to a storage capacity of up to 26.40, 26.28, and 25.94 wt%, respectively. In addition, two binding mechanisms contribute to the adsorption of hydrogen molecules: polarization of the H-2 under the electric field produced by the Ti-chain dipole and hybridization of the 3d orbitals of Ti with sigma orbitals of H-2. These lead to the hydrogen binding energies within the range of 0.22-0.56 eV/H-2, open a prospect of a promising material system for hydrogen storage at ambient temperature. The large difference in charge transfer and interaction between the metal and chains is responsible for the large hyperpolarizability. Moreover, the C and BN chains can be stabilized effectively by C-20 fullerene termination and store 8 H-2 with an average binding energy of 0.22 eV/H-2. The hydrogen desorption energies and temperatures indicate that the Ti-C-7,Ti-(B)-B4N3, Ti-(N)-B3N4, Ti-C-7-Ti, Ti-(B)-B4N3-Ti-(B), Ti-(N)-B3N4-Ti-(N), Ti-C-7-C-20, Ti-(B)-B4N3-C-20, and Ti-(N)-B3N4-C20 complexes are easy to desorb H2 molecules.
机译:理论上使用密度研究了由碱金属如Li或Ti的碱金属组成的高容量储氢介质的几何,电子结构,热化学性质,偏光性和高容量储氢介质的高容量储氢介质。功能理论(DFT)。阐明了诸如相互作用,天然键(NBO),电荷转移,能隙和突出的状态(PDOS)的基本方面(PDOS)以分析H-2分子的吸附性能。我们的结果表明,H-2在Ti-C-7,Ti-(B)-B4N3和Ti-(N)-B3N4复合物上依次引入,并且发现H-2摄取能力为10.89,10.80,分别为10.58重量%。此外,两个Ti原子可以恰好地被吸附到C-7,B4N3和B3N4链的末端,其中Ti位点可以容纳16个H-2分子,每个TI中心8个,导致储存能力高达26.40,26.28分别为25.94重量%。此外,两种结合机制有助于氢分子的吸附:通过Ti链偶极子生产的电场下的H-2的偏振,以及Ti的3D轨道与H-2的Sigma轨道杂交。这些导致氢结合能量在0.22-0.56eV / H-2的范围内,打开了在环境温度下储氢的有希望的材料系统的前景。金属和链之间的电荷转移和相互作用的大差异负责大的超极化性。此外,通过C-20富勒烯终止和存储8H-2可以有效地稳定C和BN链,其平均结合能为0.22eV / H-2。氢解吸能和温度表示Ti-C-7,Ti-(B)-B4N3,Ti-(N)-B3N4,Ti-C-7-Ti,Ti-(B)-B4N3-Ti-( b),Ti-(n)-b3N4-Ti-(n),Ti-C-7-C-20,Ti-(B)-B4N3-C-20和Ti-(N)-B3N4-C20络合物易于解吸H2分子。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号