首页> 外文期刊>Spectrochimica Acta, Part B. Atomic Spectroscopy >Monte Carlo simulation of portable X-ray fluorescence setup: Non-invasive determination of gold leaf thickness in indo-Portuguese panel paintings
【24h】

Monte Carlo simulation of portable X-ray fluorescence setup: Non-invasive determination of gold leaf thickness in indo-Portuguese panel paintings

机译:便携式X射线荧光设置的蒙特卡罗模拟:印度葡萄牙绘画中的金箔厚度无侵入性测定

获取原文
获取原文并翻译 | 示例
           

摘要

In this work, we present the combined use of in situ X ray Fluorescence spectroscopy and Monte Carlo simulation using PENELOPE code for the completely non-invasive determination of gold leaf thickness in artworks using lead white as mordant. The methodology used is based on the detection of different characteristic lines of Pb in the X ray fluorescence spectra, attenuated trough the gold leaves, and determining the thickness of gilding by comparing their attenuation. Firstly, this methodology was calibrated using model samples of simple stratigraphy, namely pure Au leafs of 1, 2 and 2.5 mu m thickness covering a Pb infinitely thick sheet. The modelled X ray setup was then used to study the gilding thickness of three panel paintings belonging to the Museum of Christian Art in Old Goa (India): two paintings, from the 18th century, concerning to the same series but different themes: Our Lady of Sorrows (MoCA1) and Our Lady of Seven Sorrows (MoCA2), and a third painting entitled Monstrance (MoCA3), from the 17th century. These panel paintings were analyzed to understand the differences and similarities between techniques, according to the time/epoch and technique of its manufacture. The obtained values for MoCA2 tend to be slightly lower than for MoCA1, however, the t student test revealed that the differences were not statistically different (p = .37). Regarding the MoCA3 painting, the average thickness was determined to be statistically different (p < .001) and higher than for the other two paintings. These results emphasize the use of different techniques concerning gold leaf beating. In the 17th century painting it was verified the use of a thicker gold leaf while in the group of the 18th century gold leaf was thinner and manufactured with a similar thickness in both paintings. These results are in consonance with the accuracy of leaf beating technology, increasing with the experience acquired during the ages.
机译:在这项工作中,我们使用Penelope Code介绍了原位X射线荧光光谱和Monte Carlo仿真的结合使用,以便使用铅白色作为伪形的艺术品中的金箔厚度的完全非侵入性测定。所用方法基于X射线荧光光谱中Pb的不同特征线的检测,减弱金叶,并通过比较它们的衰减来确定镀金的厚度。首先,使用简单地层的模型样品校准该方法,即纯Au叶的模型样本,即1,2和2.5 mu m厚度覆盖Pb无限厚的薄片。然后使用模型的X射线设置来研究属于旧戈亚(印度)的基督教艺术博物馆的三个面板绘画的镀金厚度:两幅绘画,从18世纪,关于同一系列但不同的主题:我们的女士悲伤(MOCA1)和我们七个悲伤(MOCA2)的女士以及17世纪的第三幅画,来自17世纪。分析了这些面板绘画,以了解技术之间的差异和相似性,根据其制造的时间/时代和技术。 MoCA2的所得值趋于略低于Moca1,然而,T学生测试显示差异没有统计学上(p = .37)。关于MOCA3涂漆,确定平均厚度统计学不同(P <.001),高于其他两幅绘画。这些结果强调了不同技术关于金叶跳动的技术。在17世纪的画作中,验证了使用较厚的金箔的使用,而在18世纪的金箔中,金箔较薄,在两幅绘画中以相似的厚度制造。这些结果与叶跳动技术的准确性合作,随着年龄段的经验而增加。

著录项

  • 来源
  • 作者单位

    Univ Nova Lisboa Fac Ciencia &

    Tecnol LIBPhys UNL Lab Instrumentat Biomed Engn &

    Radiat P-2829516 Monte De Caparica Portugal;

    Univ Nova Lisboa Fac Ciencia &

    Tecnol LIBPhys UNL Lab Instrumentat Biomed Engn &

    Radiat P-2829516 Monte De Caparica Portugal;

    Univ Nova Lisboa Fac Ciencia &

    Tecnol LIBPhys UNL Lab Instrumentat Biomed Engn &

    Radiat P-2829516 Monte De Caparica Portugal;

    Univ Nova Lisboa Fac Ciencia &

    Tecnol LIBPhys UNL Lab Instrumentat Biomed Engn &

    Radiat P-2829516 Monte De Caparica Portugal;

    LIP Lab Instrumentat &

    Expt Particle Phys Av Prof Gama Pinto 2 Complex Interdisciplinar 3is P-1649003 Lisbon Portugal;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 原子光谱学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号