首页> 外文期刊>Orthopaedic surgery >Biomechanical Comparison of Three Internal Fixation Techniques for Stabilizing Posterior Pelvic Ring Disruption: A 3D Finite Element Analysis
【24h】

Biomechanical Comparison of Three Internal Fixation Techniques for Stabilizing Posterior Pelvic Ring Disruption: A 3D Finite Element Analysis

机译:三种内固定技术稳定后骨盆圈破坏的生物力学比较:3D有限元分析

获取原文
获取原文并翻译 | 示例
           

摘要

Objective To compare the biomechanical stability and compatibility of two iliosacral screws (ISS), a tension band plate (TBP), and a minimally invasive adjustable plate (MIAP) for treating Tile C pelvic fractures. Methods Three groups of finite element models of the intact pelvis, including the main ligament and the proximal one‐third of both femurs, were developed to simulate vertical sacral fractures and treated with the three abovementioned internal fixation techniques. A 500 N vertical load, a 500 N vertical load plus a 10 Nm moment of forward sagittal direction, and 500 N vertical load plus a 10 Nm moment of right lateral direction were applied to the sacrum to simulate standing status, bending status, and flexion status, respectively. The maximum displacement value, the stress value, and the stress value of the fracture interface were compared among the three internal fixation techniques. Results The results showed that all three internal fixation techniques effectively restored the biomechanical transmission of the injured pelvis. The stress on the implants in the TBP model was 167.47% and 53.41% higher than that in the ISS model and the MIAP model, respectively, and the stress shielding phenomenon of the TBP model was more obvious than in the other two models. Meanwhile, the stress between the fracture interfaces in the TBP fixation models was apparently higher than that in the other two models. However, the vertical displacement of the MIAP model was not significantly different from that in the ISS and TBP model; therefore, strong fixation could be obtained in all three models. Conclusion Based on our results, we believe that the stability of Tile C pelvic fracture fixed with MIAP was similar to that of fractures fixed with ISS and TBP, but the stress shielding phenomenon and safety of implants in the TBP models were inferior to those in the MIAP and ISS fixation models. Meanwhile, MIAP and ISS fixation were more helpful to the healing processing than was TBP fixation, especially at the fracture interface of the second and third vertebral body levels.
机译:目的比较两种Iliosacral螺钉(ISS),张力带板(TBP)和微创可调节板(MIAP)的生物力学稳定性和兼容性,用于治疗瓷砖C盆腔骨折。方法开发了三组完整骨盆,包括主要韧带和近三分之一的三分之一的有限元模型,以模拟立即骶骨骨折并用三个上述内固定技术处理。 500 n垂直载荷,500 n垂直载荷加上10nm正向矢状方向,500 n垂直载荷加上10nm右侧横向方向施加到骶骨上,以模拟站立状态,弯曲状态和屈曲状态分别。在三种内部固定技术中比较了裂缝界面的最大位移值,应力值和应力值。结果结果表明,所有三种内部固定技术有效恢复了受伤骨盆的生物力学传播。 TBP模型中植入物的压力分别高于ISS模型和MIAP模型中的167.47%和53.41%,而TBP模型的应力屏蔽现象比其他两种模型更为明显。同时,TBP固定模型中断裂界面之间的应力显然高于其他两种模型的压力。然而,MIAP模型的垂直位移与ISS和TBP模型中没有显着差异;因此,在所有三种模型中可以获得强固定。结论基于我们的结果,我们认为,用MIAP固定的瓷砖C盆腔骨折的稳定性与ISS和TBP固定的骨折相似,但TBP模型中植入物的应力屏蔽现象和安全性差不多MIAP和ISS固定模型。同时,MIAP和ISS固定对愈合处理比TBP固定更有助于,特别是在第二和第三椎体水平的断裂界面。

著录项

  • 来源
    《Orthopaedic surgery》 |2019年第2期|共9页
  • 作者单位

    Department of OrthopaedicsThird Hospital of Hebei Medical UniversityShijiazhuang China;

    Department of OrthopaedicsThird Hospital of Hebei Medical UniversityShijiazhuang China;

    International Research Center for Implantable and Interventional Medical Devices School of;

    International Research Center for Implantable and Interventional Medical Devices School of;

    International Research Center for Implantable and Interventional Medical Devices School of;

    Department of OrthopaedicsThird Hospital of Hebei Medical UniversityShijiazhuang China;

    Department of OrthopaedicsThird Hospital of Hebei Medical UniversityShijiazhuang China;

    Department of OrthopaedicsThird Hospital of Hebei Medical UniversityShijiazhuang China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 外科学;
  • 关键词

    Biomechanics; Implant; Pelvic fracture; Pelvic ring;

    机译:生物力学;植入物;骨盆骨折;骨盆环;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号