首页> 外文期刊>Remote Sensing of Environment: An Interdisciplinary Journal >Accuracy assessment of ASTER, SRTM, ALOS, and TDX DEMs for Hispaniola and implications for mapping vulnerability to coastal flooding
【24h】

Accuracy assessment of ASTER, SRTM, ALOS, and TDX DEMs for Hispaniola and implications for mapping vulnerability to coastal flooding

机译:ASTER,SRTM,ALO和TDX DEM的准确性评估Hispaniola的影响和对沿海洪水的脆弱性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Digital elevation models (DEMs) derived from remote sensing data provide a valuable and consistent data source for mapping coastal flooding at local and global scales. Mapping of flood risk requires quantification of the error in DEM elevations and its effect on delineation of flood zones. The ASTER, SRTM, ALOS, and TanDEM-X (TDX) DEMs for the island of Hispaniola were examined by comparing them with GPS and LiDAR measurements. The comparisons were based on a series of error measures including root mean square error (RMSE) and absolute error at 90% quantile (LE90). When compared with > 2000 GPS measurements with elevations below 7 m, RMSE and LE90 values for ASTER, SRTM, ALOS, TDX DEMs were 8.44 and 14.29, 3.82 and 5.85, 2.08 and 3.64, and 1.74 and 3.20 m, respectively. In contrast, RMSE and LE90 values for the same DEMs were 4.24 and 6.70, 4.81 and 7.16, 4.91 and 6.82, and 2.27 and 3.66 m when compared to DEMs from 150 km 2 LiDAR data, which included elevations as high as 20 m. The expanded area with LiDAR coverage included additional types of land surface, resulting in differences in error measures. Comparison of RMSEs indicated that the filtering of TDX DEMs using four methods improved the accuracy of the estimates of ground elevation by 20-43%. DTMs generated by interpolating the ground pixels from a progressive morphological filter, using an empirical Bayesian kriging method, produced an RMSE of 1.06 m and LE90 of 1.73 m when compared to GPS measurements, and an RMSE of 1.30 m and LE90 of 2.02 m when compared to LiDAR data. Differences in inundation areas based on TDX and LiDAR DTMs were between - 13% and - 4% for scenarios of 3, 5, 10, and 15 m water level rise, a much narrower range than inundation differences between ASTER, SRTM, ALOS and LiDAR. The TDX DEMs deliver high resolution global DEMs with unprecedented elevation accuracy, hence, it is recommended for mapping coastal flood risk zones on a global scale, as well as at a local scale in developing count
机译:源自遥感数据的数字高度模型(DEMS)提供了一个有价值的和一致的数据源,用于在本地和全局尺度上映射沿海洪水。洪水风险的映射需要定量DEM高程的误差及其对泛洪区划定的影响。通过将它们与GPS和LIDAR测量进行比较,检查Hispaniola岛的Aster,SRTM,ALO和TANDEM-X(TDX)DEM。比较基于一系列错误措施,包括均均线误差(RMSE)和90%Smasterile(LE90)的绝对误差。与> 2000 GPS测量相比,高度低于7米的高度,抗皱,SRTM,ALO,TDX DEM的RMSE和LE90值分别为8.44和14.29,3.82和5.85,2.08和3.64,以及1.74和3.20米。相比之下,与来自150公里2 LIDAR数据的DEM相比,相同DEM的RMSE和LE90值为4.24和6.7.70,4.81和7.16,4.91和6.82和3.66米,其中包括高达20米的高度高度。带有激光葡萄园的扩展区域包括额外的陆地表面,导致误差措施差异。 RMSE的比较表明,使用四种方法的TDX DEM滤波提高了地升高估计的准确性20-43%。通过使用经验贝叶斯克里格化方法在渐进形态过滤器中插入地面像素而产生的DTM,与GPS测量相比,在1.73米的RMSE中产生的1.73米的RMSE,比较时为1.30米的RMSE为1.30米,LE90为2.02米到LIDAR数据。基于TDX和LIDAR DTM的淹没区域的差异在3,5,10和15米的水位上升的情况下为-13%和-4%,比艾斯特,SRTM,ALOS和LIDAR之间的泛滥差异更窄幅。 TDX DEM提供高分辨率的全球DEM,因此,建议在全球范围内映射沿海洪水风险区,以及在发展计数方面的局部规模映射

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号