首页> 外文期刊>Aerosol Science and Technology: The Journal of the American Association for Aerosol Research >A Numerical Characterization of Particle Beam Collimation by an Aerodynamic Lens-Nozzle System: Part I. An Individual Lens or Nozzle
【24h】

A Numerical Characterization of Particle Beam Collimation by an Aerodynamic Lens-Nozzle System: Part I. An Individual Lens or Nozzle

机译:气动透镜-喷嘴系统对粒子束准直的数值表征:第一部分:单个透镜或喷嘴

获取原文
获取原文并翻译 | 示例
           

摘要

Particle beams have traditionally been produced by supersonic expansion of a particle-laden gas through a single nozzle to vacuum. However, it has shown that, by passing the particle-laden gas through a series of axi-symmetric subsonic contractions expansions (an aerodynanmic lens system) prior to the supersonic expansion to vacuum through a single nozzle, beam divergence can be significantly reduced. In this paper, particle motion in expansions of a gas-particle suspension through either a single lens or a single nozzle have been investigated numerically. Since the single aerodynamic less and the isolated nozzle are the elementary components of any aerodynamic lens-nozzle inlet system, a fundamental understanding of these components is essential for designing an inlet system with the desired sampling rate, collimation, and transmission properties. If a gas undergoes subsonic contraction and expansion through an orifice, the associated particles would follow the fluid streamlines if the particles were inertialess. However, real particles may either experience a displacement toward the axis of symmetry or may impact on the front surface of the lens. The first of these effect leads to collimation of the particles near the axis,but the second effect leads to particle loss. It is found that the maximum particle displacement occurs at a particle Stokes number, St, near unity and significant impact loss also begins at St approx = 1. The lens dimensionless geometry and the Reyonlds number of the flow are other important parameters. When a gas containing suspended particles undergoes supersonic expansion through a nozzle to vacuum from the lens working pressure (approx 300 Pa), it is found that particle bean divergence is a function of Reynolds number, nozzle geometry, and particle Stokes number. More specifically, it is found that a stepped nozzle generally helps to reduce beam divergence and that particle velocity scales with the seed of sound.
机译:传统上,粒子束是通过将含粒子的气体通过单个喷嘴超音速膨胀至真空而产生的。然而,已经显示出,通过使载有颗粒的气体在超音速膨胀之前通过单个喷嘴通过一系列轴对称的亚音速收缩膨胀(空气动力学透镜系统),可以显着减小束发散。在本文中,已经对通过单个透镜或单个喷嘴的气体颗粒悬浮液的膨胀中的颗粒运动进行了数值研究。由于单个空气动力学减震器和隔离式喷嘴是任何空气动力学透镜-喷嘴进气系统的基本组件,因此对这些组件的基本了解对于设计具有所需采样率,准直和透射特性的进气系统至关重要。如果气体通过孔进行亚音速收缩和膨胀,则如果颗粒是无惯性的,则相关的颗粒将遵循流体流线。但是,真实的粒子可能会朝向对称轴移动,或者会撞击到镜头的前表面。这些效果中的第一个导致轴附近的粒子准直,但是第二个效果导致粒子损失。发现最大粒子位移发生在粒子斯托克斯数St接近于1且显着的冲击损失也始于St近似=1。透镜的无量纲几何形状和流的Reyonlds数是其他重要参数。当包含悬浮颗粒的气体通过喷嘴进行超音速膨胀,从透镜工作压力(约300 Pa)抽真空时,发现豆粒散度是雷诺数,喷嘴几何形状和斯托克斯数的函数。更具体地,发现阶梯式喷嘴通常有助于减小束发散,并且粒子速度随声音的种子而缩放。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号