Simulated fireside corrosion of T91 in oxy-combustion systems with an emphasis on coal/biomass environments

摘要

Oxy-combustion is the burning of a fuel in oxygen rather than air for the ease of capture of CO2 for reuse or sequestration. Corrosion issues associated with the change in heat exchanger tube operating environment (replacement of most of the N-2 with CO2 and potentially higher SOx levels) from air- to oxy-combustion were examined. The ferritic-martensitic alloy T91 was used in accelerated fireside corrosion tests using several different gas compositions and ash deposit overcoats to simulate air-fired, oxy-fired coal, and oxy-fired co-fired coal/biomass conditions. Initial corrosion was observed after 240 h of exposure by examining cross-sections with retained ash. Metal section losses were determined after exposures of up to 1440 h at 600-700 degrees C. Severe corrosion was observed, and a corrosion response with respect to ash deposit chemistry was observed. Corrosion response differences with respect to gas phase chemistry were minimal. Alloy-oxide scale-ash morphologies were consistent with oxide fluxing mechanisms.