首页> 外文期刊>Marine and Petroleum Geology >Pore type and pore size distribution of tight reservoirs in the Permian Lucaogou Formation of the Jimsar Sag, Junggar Basin, NW China
【24h】

Pore type and pore size distribution of tight reservoirs in the Permian Lucaogou Formation of the Jimsar Sag, Junggar Basin, NW China

机译:吉姆萨凹陷吉马凹陷,JUNGGAR BARIN,JIMSAR BAGIN,JIMSAR山谷毛孔型和孔径分布

获取原文
获取原文并翻译 | 示例
       

摘要

The tight reservoir of the Lucaogou Formation in the Jimsar sag, located in the southeastern Junggar Basin, northwest China, has been investigated for its great potential tight oil resources. In this study, petrography and mineralogy, pore microstructures, and pore size distributions of the samples collected from nine wells, were analyzed using X-ray diffraction (XRD), total organic carbon (TOC), thin sections and scanning electron microscopy (SEM). The major rock types were identified as dolomite and siltstone, which had different pore type assemblages and various pore size distribution patterns. Based on the pore origin, pores were identified as: primary mineral pores, dissolved mineral pores, primary organic matter pores and secondary organic matter pores. Their sizes followed a power law distribution, regardless of lithological variability or SEM magnification. However, the power law exponent D was associated with lithology and diagenesis as well as hydrocarbon generation. In dolomite, the decrease in dolomite content and the increase in dolomite particle size were commonly in accordance with the decrease in the power law exponent D. Compaction and cementation were the principal diagenetic processes that had a crucial effect on the pore size distribution with a large D equal to 2.77. In siltstone, the influence of various pore types on the pore size distribution was controlled by diagenesis, in which case dissolution and cementation were compensating for their influence with a fluctuating power law exponent D ranging from 1.5 to 2.7.
机译:Lucaogou地层的紧密水库在吉姆萨凹陷中,位于中国西北地区的东南部朱格巴盆地,已经调查了其巨大的潜在紧密石油资源。在本研究中,使用X射线衍射(XRD),总有机碳(TOC),薄截面和扫描电子显微镜(SEM),分析了从九个孔中收集的样品的岩化和矿物学,孔隙微观结构和孔径分布的分析(SEM) 。主要岩石类型被鉴定为白云石和硅铁晶,其具有不同的孔型组合和各种孔径分布图案。基于孔口来源,孔被鉴定为:原发性矿物孔,溶解的矿物孔,初级有机物质孔和二次有机质孔隙。它们的尺寸遵循权力法分布,无论岩性可变性还是SEM放大率。然而,权力指数D与岩性和成岩作用以及烃类产生相关。在白云石中,白云石含量的降低以及白云石粒度的增加通常是根据权力指数D的降低。压实和胶结是对孔径分布的主要作用作用,具有大的主要成岩工艺d等于2.77。在硅铁晶中,各种孔隙类型对孔径分布的影响是由成岩作用控制的,在这种情况下,溶解和胶形溶解和胶结的影响与从1.5-27的波动的动力律指数D补偿它们的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号