Microencapsulation of Algal Oil Using Spray Drying Technology

摘要

This work aims at developing a process of microencapsulation of algal oil containing &= 40 % docosahexaenoic acid (DHA) using spray drying technology. Purity Gum (R) 2000 and Capsul (R), both obtained from waxy corn starch, were chosen as the encapsulation materials. The effects of emulsification conditions on the droplet size, stability, viscosity and surface tension, and the effects of spraying conditions on the particle size, moisture content and surface oil content were investigated successively. The morphology of emulsion droplets and the microcapsules was observed by optical microscope and scanning electron micro-scopy. The results showed that the produced spherical microcapsules were smooth and free of pores, cracks, and surface indentation when shear velocity was 8.63 m/s in the first step of emulsification, homogenization pressure was 1.75.10(8) Pa and number of passes through homogenization unit was six for fine emulsification, rotational speed of spray disk was 400 s(-1), and air inlet temperature was 170 degrees C. Therefore, it was concluded that the emulsification and encapsulation of algal oil containing DHA with above process was feasible.