首页> 外文期刊>Environmental Science: Nano >Enhanced capacitive deionization of saline water using N-doped rod-like porous carbon derived from dual-ligand metal-organic frameworks
【24h】

Enhanced capacitive deionization of saline water using N-doped rod-like porous carbon derived from dual-ligand metal-organic frameworks

机译:使用来自双配体金属 - 有机框架的N掺杂的棒状多孔碳增强了盐水的电容去离子

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Capacitive deionization (CDI) removes ions from brine, and is forward-looking technology due to its low energy consumption, low cost and prevention of secondary pollution. Removal capacity is still an issue for CDI technology. It is quite urgent to design a high-performance CDI electrode material with a reasonable porous structure, excellent conductivity and hydrophilic surface. Herein, we originally designed nitrogen-doped rod-like porous carbon derived from dual-ligand metal-organic frameworks (MOFs), in which two ligands, namely 1,4-benzenedicarbocylic acid and triethylenediamine, coordinate with zinc (Zn). 1,4-Benzenedicarbocylic acid can be used as a pore-forming agent to increase the specific surface area of the carbon material, and triethylenediamine is used as a nitrogen doping source to increase the hydrophilicity and conductivity of the carbon material. By adjusting the ratio of the two ligands, the optimal specific surface area and nitrogen doping for the carbon material is obtained, thereby achieving the highest removal capacity for capacitive deionization of brine. The obtained carbon materials possess a hierarchical porous structure with moderate nitrogen doping. The large specific surface area of the electrode materials delivers many adsorption sites for adsorption of salt ions. The hierarchically porous structure provides rapid transport channels for salt ions, and high-level N doping enhances the conductivity and hydrophilicity of the carbon materials to some extent. More importantly, the salt removal capacity of the electrodes is as high as 24.17 mg g(-1) at 1.2 V in 500 mg L-1 NaCl aqueous solution. Hence, the moderate nitrogen-doping porous carbon material derived from dual-ligand MOFs is a potential electrode material for CDI application. Such results provide a new method for the preparation of high-performance electrodes to remove ions from saline water.
机译:电容式去离子化(CDI)从盐水中除去离子,并且由于其低能耗,低成本和二次污染预防,因此前瞻性技术。去除能力仍然是CDI技术的问题。设计具有合理多孔结构的高性能CDI电极材料,优异的导电性和亲水性表面是非常迫切的。在此,我们最初设计了衍生自双配体金属 - 有机骨架(MOFS)的氮掺杂棒状多孔碳,其中两个配体,即1,4-苯甲酰丙烯酸和三乙二胺,与锌(Zn)坐标。 1,4-苯甲酸咔啉酸可用作孔形成剂以增加碳材料的比表面积,并且三乙二胺用作氮掺杂源以增加碳材料的亲水性和电导率。通过调节两个配体的比例,获得最佳的比表面积和用于碳材料的氮掺杂,从而实现盐水的电容去离子的最高去除能力。所得碳材料具有具有中等氮掺杂的分层多孔结构。电极材料的大的比表面积可提供许多吸附位点以吸附盐离子。分层多孔结构提供用于盐离子的快速运输通道,高液位N掺杂在一定程度上增强了碳材料的电导率和亲水性。更重要的是,电极的盐去除容量在500mg L-1 NaCl水溶液中的1.2V下高达24.17mg(-1)。因此,衍生自双配体MOF的中等氮掺杂多孔碳材料是CDI应用的潜在电极材料。这种结果提供了一种制备高性能电极以从盐水中除去离子的新方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号