首页> 外文期刊>Engineering failure analysis >Corrosion inhibition of steel in multiple flow loop under 3.5% NaCl in the presence of rice straw extracts, lignin and ethylene glycol
【24h】

Corrosion inhibition of steel in multiple flow loop under 3.5% NaCl in the presence of rice straw extracts, lignin and ethylene glycol

机译:在存在水稻秸秆提取物,木质素和乙二醇中,在3.5%NaCl下腐蚀抑制.3.5%NaCl下的3.5%NaCl

获取原文
获取原文并翻译 | 示例
           

摘要

The investigation of steel corrosion has been done in a multiple flow loop (corrosion test rack) under hydrodynamic condition. Further, the performance of rice straw extracts (RSE), lignin (L) and ethylene glycol (EG) to inhibit the corrosion were studied through weight loss analysis. The data has been tabulated based on the different position of steel specimen in corrosion test rack; middle, elbow and the end of the rack. The initial study was performed at 30 degrees C of 3.5% NaCl alone and showed slight corrosion damage with the appearance of pitting and oxide growth. The degradation of steel surface was depending on its position in the rack which experienced different flow. A study at 40 degrees C with inhibitor solution revealed a significant inhibition. NaCl alone and EG exhibited severe corrosion at the end of the rack. In contrast, the use of RSE and lignin inhibitors reduced the corrosion attack significantly at the end of the rack. The effectiveness of the corrosion inhibitors was depending on the chemical constituents, structure, functional groups as well as the composition of the compounds. The order of the best performance of corrosion inhibitor was; RSE > L > EG. Localized pitting corrosion is a primary type of corrosion attack before general and erosion-corrosion take place.
机译:在流体动力学条件下,在多流动回路(腐蚀试验架)下已经在多流动回路(腐蚀试验架)下进行了调查。此外,通过减肥分析研究了稻草提取物(RSE),木质素(L),木质素(L)和乙二醇(例如)来抑制腐蚀的性能。数据基于腐蚀试验架中的钢样品的不同位置表示;中间,肘部和机架的末端。初始研究仅在30摄氏度为3.5%NaCl的3.5%NaCl进行,并且随着蚀蚀和氧化物生长的出现而显示出轻微的腐蚀损坏。钢表面的劣化取决于其在经历不同流动的齿条中的位置。抑制剂溶液40摄氏度的研究显示出显着的抑制作用。单独的NaCl,例如在齿条的末端表现出严重的腐蚀。相比之下,使用RSE和木质素抑制剂在机架的末端显着降低腐蚀攻击。腐蚀抑制剂的有效性取决于化学成分,结构,官能团以及化合物的组合物。腐蚀抑制剂最佳性能的顺序是; RSE> L> EG。局部点蚀腐蚀是一般和侵蚀腐蚀前的腐蚀攻击的主要类型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号