Effects of process parameters on cutting temperature in dry machining of ball screw

摘要

Temperature in the cutting zone during dry machining has a significant effect on the tool life and surface integrity of the workpiece. This paper describes a comprehensive research on the cutting temperature in dry machining of ball screw under whirling milling by using infrared imaging. The effects of tool parameter and geometric parameter of workpiece together with the cutting parameters on the maximum and average temperatures in the cutting zone were analyzed in full detail. The influencing degree of these parameters on the maximum and average temperatures was affected by the value ranges of the parameters. In addition, the regression model and back propagation (BP) neural network model were proposed for predicting the maximum and average temperatures in the cutting zone. The verification of the predictive models showed that compared to the regression model, BP neural network model could predict the cutting temperature with high precision. The R-2 of BP neural network model for predicting the maximum and average cutting temperatures in the cutting zone was higher than 99.8%, and the mean relative error and root mean square error were less than 4% and 19%, respectively. (c) 2020 ISA. Published by Elsevier Ltd. All rights reserved.